LORD 410/19GB Medium Set 20-30 minute Low Temperature Resistant, Non-Sag acrylic adhesives
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$125.00 CAD
Call for ETA
Replace rivets and welds with the structural power of LORD 410/19GB. This toughened acrylic adhesive is engineered for heavy-duty metal bonding, capable of gripping unprepared aluminum, steel, and galvanized surfaces with minimal prep. Featuring a 20-30 minute open time for stress-free assembly of large parts, it cures to a non-sag, impact-resistant bond that stays strong even in freezing temperatures down to -40°F, making it the trusted choice for transport trailers, signs, and outdoor industrial equipment
Lord 410 modified acrylic adhesive and Lord Accelerator 19GB is a two part system that provides excellent adhesion to metal and engineered plastic surfaces. It is most typically used for the replacing of welding, riveting, brazing, and many other mechanical fastening methods.
Lord 410 acrylic adhesive was designed to work extremely well in cold environments and with applications that require a very high impact or high peel loads.
- Medium Setting 20 to 30 minute set time (aka working life)
- with a Medium time to handling strength of 60 to 120 minutes
- The 'GB' feature is code for Glass Microbead infused, which enables a controlled minimum bondline width.
The overall shelf life of the product when kept at a stable room temperature and in its original unopened container is six months. If stored at a lower temperature, please allow the paste to to return to room temperature before use. Do not store this product near a heat source, open flames, or where sparks are visible. Lord 410 is an extremely versatile product that also features a Non-Sag formula that allows it to remain in position and is extremely flammable.
Lord 410 is an acrylic, non-sag, versatile, temperature resistant adhesive that provides bonding for a wide variety of prepared and unprepared metals and plastics. This product was specifically designed to work great at low temperatures with high peel loads or high impact situations.
Typical Use:
Replace welding, brazing, riveting and other mechanical fastening methods. Bonding of meatal and plastic surfaces
Temperature Resistant:
Performs at temperatures from -40 to +149°C
Environmentally Resistant:
Resists: dilute acids, alkalis, solvents, greases, oils, moisture, UV exposure, salt spray and weathering.
Non-Sag:
Remains in position when applied on vertical or overhead surfaces.
Viscosity, cP @ 25°C:
100,000 - 350,000
Density kg/m3:
1096-1156
Flash Point °C:
15
Working Time, Min @ 24°C:
2-4
Solids Content, %:
100
Time Handling Strength, Min @ 24°C:
60-120
Tensile Strength at Break, psi:
4650
Elongation, %:
30
Young's Modulus, psi:
130,000
T-Peel, pli:
26
Lap Shear @ -34°C, psi:
3300