LOCTITE® Stik'N Seal® Oil & Gas Resistant Adhesive Sealant – Neoprene Contact Cement for Automotive Repairs 1252795
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$9.00 CAD
Call for ETA
LOCTITE® Stik’N Seal® Oil & Gas Resistant Adhesive Sealant is a neoprene-based contact adhesive and sealant formulated to bond and hold where ordinary household glues fail. Once fully cured, the bond resists oil, gasoline, and antifreeze, making it a practical choice for automotive and light-industrial repairs where those fluids are present.
Key Features
- Neoprene (polychloroprene) contact adhesive and sealant
- Cured bond resists oil, gasoline, and antifreeze exposure
- Dries clear for a clean, low-visibility repair
- Bonds a wide range of materials from one tube
- Convenient 30 mL (1 fl oz) squeeze tube for spot repairs
Common Uses
- Reattaching weatherstripping and door or window seals
- Automotive interior and trim repairs (carpeting, vinyl, trim panels)
- Bonding rubber gaskets and seals exposed to fuel or oil splash
- General maintenance repairs on metal, rubber, and plastic components
How to Use
- Clean and dry both surfaces to be bonded; remove old adhesive, oil, and debris.
- Apply a thin, even layer of adhesive to one or both surfaces.
- Press the surfaces together and hold or clamp as needed.
- Allow approximately 30 minutes to reach handling strength; allow 24 hours for full cure before exposing the bond to oil, gas, or antifreeze.
Product Specifications
| Brand | Loctite |
|---|---|
| Product Line | Stik’N Seal® |
| Chemistry | Neoprene (polychloroprene) contact adhesive |
| Color | Dries clear |
| Handling Time | Approximately 30 minutes |
| Full Cure | 24 hours |
| Service Temperature | Up to 140°F (60°C) |
| Chemical Resistance (cured) | Oil, gasoline, antifreeze |
| Typical Substrates | Metal, rubber, plastic, weatherstripping, carpeting, vinyl |
| Package Size | 30 mL (1 fl oz) tube |
| Item Number | 1252795 |
Important Limitations
This is a solvent-based contact adhesive; use in a well-ventilated area, away from open flame, sparks, or other ignition sources, and keep away from children. Chemical resistance applies to the fully cured bond only — allow the full 24-hour cure before exposure to oil, gas, or antifreeze. Not evaluated for structural or load-bearing applications. Refer to the product label and SDS for complete handling and first-aid information.