Loctite HY 4070 Universal Bonder – 11 g Twin Syringe
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$42.00 CAD
Call for ETA
Fast, versatile structural repair in a ready-to-use 11 g twin syringe. LOCTITE® HY 4070 Universal Bonder combines cyanoacrylate speed with acrylic strength to bond many plastics, rubbers, metals, wood, paper, leather, and other dissimilar materials. Its non-sag gel stays where applied—even on vertical or overhead repairs—and fills gaps up to 5 mm (0.2 in).
Why choose LOCTITE HY 4070?
- Fast fixturing: fixtures in under 60 seconds on etched aluminum at a 0.5 mm bond gap.
- Broad substrate versatility: ideal for general repair, structural bonding, edge bonding, interior repairs, and bonding dissimilar materials.
- High gap fill: fills bond gaps up to 5 mm (0.2 in).
- Non-sag gel: controlled application on vertical and overhead surfaces.
- Durable performance: resists moisture and temperatures from -40°F to 212°F (-40°C to 100°C).
- No dispensing gun required: the 11 g 10:1 twin syringe includes a plunger and four mixing nozzles.
Technical specifications
| Brand / Product | LOCTITE HY 4070 Universal Bonder |
| Henkel IDH | 2264448 |
| Package | 11 g twin syringe; plunger and 4 mixing nozzles included |
| Chemistry | Two-part cyanoacrylate / acrylic hybrid |
| Mix ratio | 10:1 by volume |
| Form | Non-sag gel |
| Color | Transparent, cloudy colorless to pale yellow |
| Gap fill | Up to 5 mm (0.2 in) |
| Fixture time | <60 seconds on etched aluminum at 0.5 mm gap; cure speed varies by substrate, gap, and temperature |
| Operating temperature | -40°F to 212°F (-40°C to 100°C) |
| Shear strength | Up to 3,625 psi (25 N/mm²) on grit-blasted steel |
| UPC | 079340011717 |
Application guidance
- Clean and degrease both surfaces; allow them to dry.
- Insert the plunger, remove the cap, and purge a small amount from both chambers.
- Attach a mixing nozzle and dispense at least half a nozzle length before applying.
- Apply to one surface, assemble the parts, and hold securely until handling strength develops.
Important: Not recommended for bonding glass. Working and fixture times vary with substrate, bond gap, temperature, and humidity. Review the current technical data sheet and both component safety data sheets before use.
Safety: Part A can bond skin and eyes in seconds and is classified as a combustible liquid for ground transport. Part B may cause skin and eye irritation and allergic skin or respiratory reactions. Use appropriate gloves and eye protection with adequate ventilation. Keep out of reach of children.