Insulcast I-Gel 70 CC FR NS Silicone Dielectric Gel
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$1,163.00 CAD
Call for ETA
Insulcast I-Gel 70 CC FR NS is a silicone dielectric gel that protects your electronics from heat, moisture, and vibration. Pour or pump it around the assembly and it cures to a tough, protective mass that keeps the finished part working in the field. Sold in multiple sizes and, where the system is two-part, in matched Part A and Part B.
Features
- Seals out moisture, dust, and contaminants
- Cushions components against shock and vibration
- Thermally conductive (0.55 W/mK) to carry heat away from hot-running parts
- Flame retardant (UL 94 V-0) for fire-safety requirements
- Strong dielectric protection for reliable electrical isolation
- Backed by ITW Performance Polymers
Intended Uses
- Potting power supplies, transformers, and coils
- Sealing sensors, connectors, and control modules
- Protecting LED and lighting electronics
- Encapsulating medical device electronics
- EV and e-mobility power electronics
Physical Properties
- Mix ratio (by weight): 100:5.5-6
- Viscosity (Part A): 16,000 cP
- Pot life (25C): 120 min (gel 330 min)
- Cure: 3 hr @100C + post-cure 1 hr @150C
- Hardness: Shore D 80 +/-5
- Service temp: -55 to 155 C
- Thermal conductivity: 0.55 W/mK
- Dielectric strength: 425 V/mil
- Flammability: UL 94 V-0
Mix Ratio and Cure
Mix Part A and Part B at 100:5.5-6 by weight. Cure: 3 hr @100C + post-cure 1 hr @150C. Degas under vacuum for a void-free pot in critical assemblies.
Shop Insulcast potting and encapsulation compounds at Perigee Direct.