Bostik Pliogrip 1010C Two-Part Structural Acrylic Adhesive - Gray - 490ml Cartridge

Bostik Pliogrip 1010C is a two-part, 10:1 structural acrylic adhesive for bonding composites, plastics, and bare metals. It builds structural bonds with no sanding and minimal surface preparation, cures at room temperature, and is used across marine, wind, transportation, and infrastructure work. Supplied in a 490 ml side-by-side cartridge.

Features

• No surface preparation required on FRP, gel coat, or metal
• Room temperature cure, no heat or post-bake needed
• Open time of 8 to 10 minutes
• Fixture time of 16 to 24 minutes
• Resists salt water, gasoline, and temperature extremes
• Reaches full cure in both thick and thin bond lines

Applications

• Open mold FRP, RTM, and infusion composite bonding
• Gel coat and fiberglass assembly
• Marine hull and component bonding
• Wind blade and transportation structures
• Bonding ABS, polycarbonate, aluminum, stainless steel, and cold rolled steel

Physical Properties

• Chemistry: two-part structural acrylic
• Mix ratio: 10:1
• Color: gray
• Package: 490 ml side-by-side cartridge
• Recommended mixer: MFX 10-18 static mixing nozzle
• Shelf life: 183 days
• Country of manufacture: USA

Surface Preparation and Use

Structural bonds can be achieved on FRP, gel coat, and metal with minimal preparation and, in most cases, no sanding. Dispense through an MFX 10-18 static mixing nozzle, apply within the open time, and clamp or fixture the parts until the adhesive reaches handling strength. Full cure develops at room temperature in both thick and thin sections.

FOR INDUSTRIAL USE ONLY. Refer to the SDS before use.

Questions about Pliogrip 1010C, or need help choosing the right structural adhesive? Call (888) 928-0202 or email sales@perigeedirect.com.