Permabond Acrylic Slow Set 30-60 min TA437 300ml Cartridge and Starter Kit
PERMABOND TA437 is a single component structural acrylic adhesive designed primarily for bonding metals, ferrites and ceramics. The typical fixture time of TA437 when used with Initiator 41 is 20-30 seconds. The fast fixture time of TA437 makes it an ideal adhesive for high speed production lines. When the use of the activator is not desirable, the material will cure anaerobically in a close-fitting joint / in presence of metal, the fixture time will be 5-10 minutes. This product provides high strength, tough, durable bonds with good impact resistance.
- Adhesion to a wide variety of substrates
- Medical Device Approved formula
- Set time is 30-60 min
- Fast cure at room temperature
- No mix application
- High shear and peel strength
- Good impact strength
- High temperature resistance
Physical Properties of Uncured Adhesive
|
Chemical composition |
Urethane methacrylate |
|
Appearance |
Orange/red viscous liquid |
|
Viscosity @ 25°C |
20rpm: 25,000 – 50,000 mPa.s (cP) 2.5rpm: 90,000 – 150,000 mPa.s (cP) |
|
Specific gravity (resin) |
1.1 |