Maven EA 2031 - 60-Min Set Chemical Resistant -Black Thixotropic Toughened Epoxy Gel
Maven EA 2031 is a 1:1 mix ratio, black, toughened, thixotropic (non-slumping up to 10mm thickness) adhesive suitable for metal and composite bonding with good adhesion on Polyamides. It has low shrinkage characteristics and a high chemical resistance.
Embedded with spacers (glass beads) it retains it's integrity well, will not sag/gap or run, and has enhanced bond strength at larger bondlines. It is particularly suitable for GRP (Glass Reinforced Plastics) Polyamide and SMC (Sheet Molded Compounds) bonding.
Backup / Substitute Spec for: Araldite 2031-1
Key Features
- Thixotropic - non slumping
- Toughened adhesive, resilient bond
- Suitable for metal and composite bonding, good adhesion onto polyamides
- High Resistance to chemicals
- Low shrinkage
Technical Specs
| Part Number | EA2031 |
| Item Weight | 4 ounces |
| Product Dimensions | 6 x 3 x 1 inches |
| Origin | Made in USA |
| Item model number | 2031-1 |
| Color | Black |
| Cartridge Types |
1:1 Ratio 50ml A-System Square-Back 1:1 Ratio 380ml C-System |
| Material | Epoxy |
| Item Package Quantity | 1 |
| Number Of Pieces | 1 |
| Special Features | Toughened |
| Included Components | Mixing Syringe Included |
Storage
Maven EA 2031 may be stored for up to 3 years at room temperature provided the components are stored in sealed containers. The expiry date is indicated on the label.
For additional information, consult the TDS and SDS.
Please Note:
The 50ml Cartridges are 1:1 ratio, and are designed to work best with a 50ml cartridge Dispenser with a 1:1 ratio plunger. We strongly advise you use a 50ml Dispenser with a 1:1 ratio plunger for this cartridges. If you do not have one, please check out our 1:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval. If you prefer not to use a Dispenser, then we recommend considering one of our 50ml Kits that include a variety of different accessories that you may need for fast small jobs.
The 380ml Cartridges are 1:1 ratio, and are designed to work best with a 380ml cartridge Dispenser with a 1:1 ratio plunger. We strongly advise you use a 380ml Dispenser WITH a 1:1 ratio plunger for this cartridges. If you do not have one, please check out our 1:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval.