LORD Maxlok T6 MX (3019632) 4:1 Ratio Fast set 6-9 min Acrylic Adhesive non-sagging, and resistance to temperature, moisture, solvents

In stock
SKU: LORD_MAXLOK_T6_050ML_3019632
Cartridges or Starter Kit
Size
Configuration
Regular price $37.00 AUD
2 units are available

Product details

  • Type Acrylic (MMA)
  • Vendor Lord
  • SKU LORD_MAXLOK_T6_050ML_3019632
  • Barcode 3019632

LORD Maxlok MX-T6 is a two component grey paste acrylic adhesive that is designed to replace brazing, welding, riveting, and other fastening systems. The adhesive is well suited for applications that endure wide temperature ranges, and that are subjected to high impact or high peel loads. MX- T6 is non-sag, allows precise control of bondline thickness, and is UL 746C certified. It has a working time of 6-9 minutes at 77° F, Flash point at 59° F, and will it will be fully cured in 24 hours. This acrylic adhesive is capable of bonding a variety of unprepared metals and it will resist solvents, greases, oils, moisture, salt spray, dilute acids and weathering. It also has excellent resistance to indirect Ultraviolet exposure.

Advantages and Features:

Versatile - requires little substrate preparation and binds a wide variety of unprepared metals.
Temperature Resistant: Operates between -40 and +300°F (–149 to +149°C).
Environmentally Resistant - withstands diluted acids, alkalis, solvents, greases, oils, dampness, salt spray, and weathering; offers exceptional resistance to indirect UV exposure.
UL Rated - Maxlok MX/T6 adhesive system is UL 746C approved and is UL rated.
Precise Bondline - Since it contains glass beads with a diameter of 0.01 inches (0.025 cm), Precise Bondline enables exact control of the adhesive bondline thickness.
Non-Sag - maintains position when applied to overhead or vertical surfaces, enhancing process flexibility

  • Typical Properties
    MX Accelerator T3 Adhesive T6 Adhesive T18 Adhesive
    Appearance Grey Paste Off-white to Tan Paste Off-white to Tan Paste Off-white to Tan Paste
    Viscosity 170,000-320,000 70,000-120,000 80,000-180,000 80,000-180,000
    Density


    lb/gal

    (kg/m^3)

    11.5-12.1


    (1378-1450)

    8.3-8.7


    (995-1042)

    8.4-8.9


    (1007-1066)

    8.4-8.9


    (1007-1066)

    Flash Point, °F (°C) 201 (94) 59 (15) 59 (15) 59 (15)
    Typical Properties Of Adhesive Mixed with Accelerator
    MX/T3 MX/T6 MX/T18
    Mix Ratio by Volume, Accelerator to Adhesive 1:4 1:4 1:4
    Solids Content, % 100 100 100
    Working Time, min @ 77°F (25°C) 3-5 6-9 18-24
    Time to Handling Strength, min @ 77°F (25°C) 6-8 20-24 48-72
    Mixed Appearance Grey Paste Grey Paste Grey Paste
    Typical Cured Properties
    Tensile Strength at Break, psi (MPa) 2800 (19.3)
    Elongation, % >10
    Young’s Modulus, psi (MPa) 108,778 (750)
    Glass Transition Temperature, °F(°C) 194 (90)
    Metal Bond Performance
    Substrates Aluminum to Aluminum HDG to HDG EZG to EZG
    Lap Shear @ Room Temperature, psi (MPa)


    Failure Mode

    2760 (19)


    Cohesive

    2410 (16.6)


    Cohesive

    2190 (15.1)


    Cohesive

    Lap Shear @ Hot Strength [180°F (82°C)], psi (MPa)


    Failure Mode

    1030 (7.1)


    Cohesive

    1150 (7.9)


    Cohesive

    1000 (6.9)


    Cohesive

    Lap Shear after 1400 hours Salt Spray


    Exposure, psi (MPa)

    Failure Mode

    2140 (14.8)


    Cohesive

    1760 (12.1)


    Cohesive

    1430 (9.9)


    Cohesive

    Lap Shear @ -40°F (-40°C), psi (MPa)


    Failure Mode

    3150 (21.7)


    Cohesive/Adhesive

    2400 (16.5)


    Cohesive/Adhesive

    2550 (17.6)


    Cohesive

    T-Peel, pli (N/mm)


    Failure Mode

    41 (7.2)


    Cohesive

    53 (9.3)


    Cohesive

    54 (9.5)


    Cohesive

    Plastic/Composite Bond Performance
    Substrates ABS to ABS FRP to FRP
    Lap Shear @ Room Temperature, psi (MPa)


    Failure Mode

    520 (3.6)


    Stock Break

    1280 (8.8)


    Fiber Tear

    Lap Shear after 1400 hours Salt Spray


    Exposure, psi (MPa)

    Failure Mode

    460 (3.2)


    Stock Break

    520 (3.6)


    Fiber Tear

    Lap Shear @ -40°F (-40°C), psi (MPa)


    Failure Mode

    920 (6.3)


    Stock Break

    869 (5.99)


    Fiber Tear