LORD 7100A/B Black Urethane Fast Set 5-10 min Adhesive for most plastics, painted metals, rubbers, foam, powder-coated metals, paper, cloth, etc

In stock
SKU: LORD_7100_50ML_3012640
Cartridges, Pails or Starter Kit
Regular price $55.00 AUD
Currently Out of Stock Call for ETA
Currently Out of Stock Place Order and Call for ETA

LORD® 7100 A/B adhesive is a two-part, high-strength urethane adhesive used to bond cloth, paper, plastics, foams, rubber, painted metals and powder coated metals.

LORD 7100-A resin is composed of isocyanate. LORD 7100 A/B curative is composed of polyol. This adhesive can be cured at either room temperature or with heat for faster processing.

LORD 7100 adhesive cures to a glossy black appearance. It is non-flammable, durable, and resistant to weathering, aging, and solvents.

Good for bonding to:

Most Plastics, cloth, paper, foams, rubber, painted metals and powder coated metals

Packaging Sizes & Part Numbers:

3012640 LORD 7100A / 7100B - 50ml cartridge
3013630 LORD 7100A / 7100B - 200ml cartridge
3013692 LORD 7100A - Part A - 2.5-Gallon Pail
3013625 LORD 7100B - Part B - 5-Gallon Pail

Features and Benefits

  • 5 to 10 minute working life (set time)
  • 2 hours time to handling strength
  • Black color
  • Medium-Low viscosity, flowable, but also short set time so will not flow excessively
  • Convenient – reduces material and labor costs by eliminating the need to prime many plastics
  • Durable – creates high-strength bonds to plastics without crazing, attacking, or lowering the strength of the plastic substrate
  • Non-Flammable – does not require explosion-proof equipment
  • Environmentally Friendly – no VOC content: does not contain ozone depleting chemicals
  • Chemically Resistant – solvent resistant when cured
  • Environmentally Resistant – resists weathering and aging

Typical Use: Use to bond cloth, paper, plastics, foams, rubber, painted and powder coated metals. LORD® 7100-A resin is composed of isocyanate. LORD® 7100-B curative is composed of polyol.
Chemical Composition: Urethane
Color: Black
Components: 2 part
Cure System: Room Temperature
Cure Time: 24h @ room temperature
Flash Point: >93 °C
Mix Ratio: 1:2 by volume; 1:1.78 by weight
Tack Free Time: 2 to 3h @ 23 °C
Viscosity: Part A: 3,000 to 16,000; Part B: 45,000-72,000
Working Time: 5 to 10min @ 25 °C

Shelf Life
The shelf life of LORD 7100 A/B is six months when stored at temperatures under 80°F (27°C) in its original, unopened container.

For maximum shelf life, storage temperatures of 40-50°F (4-10°C) are recommended. If stored at these cooler temperatures, allow product to return to room temperature before using.

After opening, protect adhesive from excessive exposure to moisture by installing desiccant cartridges and/or using dry nitrogen as an inert cover.