3M Scotch-Weld

3M Scotch-Weld DP100NS Translucent - 5 Minute Flexible Non-Sag Fast Set Epoxy

In stock
SKU: 3M_DP100NS_050ML
Which Kit do you Need?
$78.00 AUD
11 units are available

Product details

  • Type Epoxy
  • Vendor 3M Scotch-Weld
  • SKU 3M_DP100NS_050ML
  • Barcode 62-3575-1437-1
Description

3M ScotchWeld DP-100NS (thick NonSag) Translucent 3-5 Minute Set (Work Life) Epoxy Adhesive is an extra fast set/cure rigid multipurpose, two-component, room temperature translucent-drying epoxy adhesive of good strength and toughness.

It is an excellent bonder for Steel (ferrous and stainless), Aluminum, and many types of Plastics.

Please Note: These cartridges are designed to work best with a 50ml cartridge Dispenser. It is strongly advise you use a 50ml Dispenser for this cartridge. This 3M cartridge will fit into any standard ‘Square-Back’ Dispenser. If you do not have one, please check out the “MixPac 50ml Dispenser” here on Amazon.

Work Time: 3-5 minutes set Handling Strength: 15-20 minutes

Full Cure Strength: 24 hours

Color: Clear

Viscosity: Thick Non-Sag Gel (95,000 cps)

Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes.

Typical Cured Physical Properties:

Color Translucent Clear

Shore D Hardness 80-85

Time to Handling Strength 15-20 min. @ 23°C (73°F)

Full Cure Time 24-48 hours @ 23°C (73°F)