{"product_id":"ultralok-5460-white-structural-epoxy-adhesive","title":"UltraLok 5460 White 2:1 Structural Epoxy Adhesive – High-Strength Industrial Bonding, Potting and Laminating Epoxy","description":"\u003ch1\u003eUltraLok 5460 White Structural Epoxy Adhesive – 2:1 High-Strength Bonding Epoxy\u003c\/h1\u003e\n\u003ch2\u003eHigh-Strength Epoxy for Demanding Industrial Bonds\u003c\/h2\u003e\n\u003cp\u003eUltraLok 5460 White is a tough, two-part epoxy hybrid adhesive engineered for structural bonding, laminating, small potting applications, and general industrial assembly. Its high-strength, low-shrink formula creates durable bonds while providing excellent wetting across a wide variety of materials.\u003c\/p\u003e\n\u003cp\u003eDesigned for applications that require dependable mechanical strength, dimensional stability, and electrical insulation, UltraLok 5460 performs well on metals, fiberglass, ceramics, and many plastics. Once fully cured, it forms a rigid, off-white bond with excellent resistance to moisture, weathering, fuels, oils, solvents, mild acids, and alkalis. (\u003ca href=\"https:\/\/www.chemical-concepts.com\/product\/ultralok-5460-white\/\" title=\"UltraLok® 5460 White - Chemical Concepts Inc\"\u003eChemical Concepts Inc\u003c\/a\u003e)\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-strength structural epoxy adhesive\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBonds metals, fiberglass, ceramics, and many plastics\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExcellent toughness and impact resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-shrink formula helps maintain bond-line stability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWide service temperature range from -60°F to 302°F\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eResistant to water, weather, fuels, oils, alcohols, and many solvents\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProvides durable electrical insulation after curing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLong 40- to 60-minute working time for positioning and assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConvenient 2:1 mix ratio\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for cartridges, manual mixing, and meter-mix equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOff-white cured appearance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0% VOC by weight\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuilt for Strength and Long-Term Durability\u003c\/h2\u003e\n\u003cp\u003eUltraLok 5460 develops strong, rigid bonds capable of handling demanding industrial conditions. The cured adhesive provides a lap shear strength greater than 3,700 PSI on aluminum and a tensile strength of approximately 6,600 PSI.\u003c\/p\u003e\n\u003cp\u003eIts impact resistance and Shore D hardness make it suitable for bonded assemblies that may experience vibration, mechanical stress, temperature changes, or regular handling. The adhesive also maintains excellent dimensional stability across a broad operating temperature range.\u003c\/p\u003e\n\u003ch2\u003eChemical and Environmental Resistance\u003c\/h2\u003e\n\u003cp\u003eOnce fully cured, UltraLok 5460 resists exposure to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWater and weather\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOzone and oxygen\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGasoline and diesel fuel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOils and alcohols\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVarious solvents\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMild acids and alkalis\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMany other organic compounds\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause actual chemical exposure, temperature, and operating conditions vary, users should test the adhesive under their specific service conditions before full-scale use.\u003c\/p\u003e\n\u003ch2\u003ePopular Applications\u003c\/h2\u003e\n\u003cp\u003eUltraLok 5460 is well suited for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMetal-to-metal structural bonding\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBonding fiberglass and composite components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCeramic assembly and repair\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIndustrial equipment assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eElectrical component potting\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmall encapsulation projects\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLaminating panels and components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFixture and bracket bonding\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAutomotive and transportation components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMarine and outdoor assemblies\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGeneral manufacturing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBonding similar or dissimilar materials\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eElectrical Insulation and Potting Performance\u003c\/h2\u003e\n\u003cp\u003eFully cured UltraLok 5460 provides durable electrical insulation, making it a strong option for small potting and encapsulation applications. Its electrical properties include a dielectric strength of approximately 440 volts per mil and a volume resistivity of 8 × 10¹⁴ ohm-cm.\u003c\/p\u003e\n\u003ch2\u003eMixing and Application Instructions\u003c\/h2\u003e\n\u003cp\u003eBring both components to room temperature before use.\u003c\/p\u003e\n\u003cp\u003eMix \u003cstrong\u003e2 parts resin to 1 part activator by volume\u003c\/strong\u003e. For weight-based mixing, use approximately \u003cstrong\u003e213 grams of Part A for every 100 grams of Part B\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eMix thoroughly for 30 to 60 seconds, scraping the sides and bottom of the mixing container to produce a uniform blend. Apply the mixed adhesive to properly prepared surfaces and position the components before the working time expires.\u003c\/p\u003e\n\u003cp\u003eFor best results, surfaces should be clean, dry, and free from oil, dust, oxidation, and other contaminants.\u003c\/p\u003e\n\u003ch2\u003eCure Schedule at 75°F\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWorking time:\u003c\/strong\u003e 40 to 60 minutes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFixture time:\u003c\/strong\u003e 2 to 4 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFull cure:\u003c\/strong\u003e 24 to 48 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParts can generally be moved after approximately four hours. Cure time will vary with bond thickness, material temperature, ambient conditions, and the size of the mixed batch. Moderate heat may be used to shorten fixture and final cure times when appropriate for the bonded materials.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth align=\"right\"\u003eTypical Value\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdhesive type\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eTwo-part epoxy hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMix ratio\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e2:1 by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight mix ratio\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e213:100, Part A to Part B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixed color\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eOff-white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e40–60 minutes at 75°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFixture time\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e2–4 hours at 75°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e24–48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e-60°F to 302°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLap shear strength\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eGreater than 3,700 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e6,600 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e75–80 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact resistance\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eGreater than 150 in-lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater absorption\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eLess than 1% after 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixed density\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e9.5 lb\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVOC content\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e0% by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eStorage\u003c\/h2\u003e\n\u003cp\u003eStore the adhesive in its original, tightly closed packaging under appropriate indoor storage conditions. Keep both components protected from contamination and excessive heat. For best performance, bring the material to room temperature before dispensing and mixing.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose UltraLok 5460?\u003c\/h2\u003e\n\u003cp\u003eUltraLok 5460 combines high structural strength, impact resistance, chemical resistance, electrical insulation, and an extended working time in one versatile adhesive. It is a dependable choice for manufacturers, fabricators, technicians, and repair professionals who need a tough epoxy for precise assembly and long-lasting bonds.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"UltraLok","offers":[{"title":"Fresh Batch \/ 50ML","offer_id":48567951491326,"sku":"CS_ULTRALOK_5460_WH_50ML","price":23.65,"currency_code":"USD","in_stock":true},{"title":"Fresh Batch \/ 200ML","offer_id":48567951524094,"sku":"CS_ULTRALOK_5460_WH_200ML","price":55.63,"currency_code":"USD","in_stock":true},{"title":"Fresh Batch \/ 400ML","offer_id":48567951556862,"sku":"CS_ULTRALOK_5460_WH_400ML","price":72.63,"currency_code":"USD","in_stock":true},{"title":"Short Shelf Life (1-3 Mths Left) \/ 50ML","offer_id":48567951589630,"sku":"SL_CS_ULTRALOK_5460_WH_50ML","price":18.99,"currency_code":"USD","in_stock":false},{"title":"Short Shelf Life (1-3 Mths Left) \/ 200ML","offer_id":48567951622398,"sku":"SL_CS_ULTRALOK_5460_WH_200ML","price":45.99,"currency_code":"USD","in_stock":false},{"title":"Short Shelf Life (1-3 Mths Left) \/ 400ML","offer_id":48567951655166,"sku":"SL_ CS_ULTRALOK_5460_WH_400ML","price":20.52,"currency_code":"USD","in_stock":false},{"title":"Recently Expired \/ 50ML","offer_id":48567951687934,"sku":"XP_CS_ULTRALOK_5460_WH_50ML","price":59.99,"currency_code":"USD","in_stock":false},{"title":"Recently Expired \/ 200ML","offer_id":48567951720702,"sku":"XP_CS_ULTRALOK_5460_WH_200ML","price":26.99,"currency_code":"USD","in_stock":false},{"title":"Recently Expired \/ 400ML","offer_id":48567951753470,"sku":"XP_ CS_ULTRALOK_5460_WH_400ML","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/cca-ul54190-50ml-img_1_1.jpg?v=1783703917","url":"https:\/\/www.perigeedirect.com\/products\/ultralok-5460-white-structural-epoxy-adhesive","provider":"Perigee Direct","version":"1.0","type":"link"}