Sulzer MixPac 50ml Empty 10:1 Ratio B-System with S-Flange (RoundBack) 2-Part Cartridges with sealing cap & pistons (PBT Plastic, optimized for MMA Materials)

Atlas Professional


  • $ 14.99
    (We can use your FedEx/UPS acct: Type-in the needed Acct # & Service Level)
    Will not ship until

    Sulzer MixPac 50ml 2-Part (dual-component) 10:1 ratio empty Adhesive Cartridges with included Reseal-able Cap and Sealing Pistons. 

    B-System with S-Flange (RoundBack), popular for use in packaging MMA (Methyl Methacrylate) and Acrylic adhesives).  

    Used for filling and dispensing 2-part adhesives, epoxies, silicones, urethanes, and other 2-part fluids and compounds. 

    Sulzer MixPac Cartridge Part Number:  116373 (AB S50-10-20-01) 

    Available in 2 kit packages, plus Accessories:

    • Empty Cartridges and related Pistons 
    • Starter Kit with Dispenser
    • Useful Additional Accessories

    Each kit includes different cartridge-count options… either 5, 10, 25, 50, 100, and a full Bulk Carton of 1250 cartridges, all includes the necessary cap and sealing pistons to close and seal the empty cartridges.

     About the Cartridges:

    Perfect for storing and applying bulk adhesives that use a 10:1 mix ratio, where precise metering and mixing is needed. NOTE: With these empty cartridges, you will need a dispensing product to push/extrude/dispense the adhesive out.

    These cartridges are the Sulzer SB-System format, which have the Distinct Gray-Caps, and the distinct Rounded-Back design.  They employ the Orange Mixing Nozzles with Gray inlets.  A particular feature of the BS-System Cartridges is that they keep the two parts completely separate and eliminate material cross-contamination when in storage.

    And a key feature of this cartridge is it's easy-to-install pin-style sealing pistons, which allows air to escape as pistons are inserted, and then seals-off with the push of the blue pin.

    About the Starter Kits:

    Each Starter Kit includes either 5, 10, 25, 50, or 100 cartridges, related sealing pistons and cartridge caps, mixing nozzles (one nozzle for each cartridge in your kit), and one Industry-Standard MixPac DS51 50ml dispenser. 

    We recommend checking out our Starter Kits to get set up and running.  Or if you prefer getting the dispenser separately, check out the MixPac DS51 50ml Dispensers, which will enable you to dispense the adhesives out of these cartridge kits.

    Welcome Newcomer