Sulzer 10:1 J-System 825ml Nylon Cartridge with Pistons and Sealing Cap

Perigee Direct

SKU: SULZER_82510_CRTG_001

  • $ 6.99


    Empty 825ml Adhesive Cartridges for 10:1 ratio adhesives, with included Resealable Cap and Sealing Pistons. Each cartridge includes the necessary cap and Sealing Pistons to close and seal the empty Cartridges. Mixing nozzles and other accessories sold separately above in banner ribbon

    Sulzer MixPac Cartridge Part Number: AJ 825-10-30-05  ,  301809

    High-Density 2-Part (dual-component) 10:1 ratio 825ml empty Adhesive Cartridge, with included Resealable Cap and Sealing Pistons. 

    NOTE: With these empty Cartridges, you will need additional accessories: a dispensing product and mixing Nozzles to push/extrude/dispense the adhesive out. We recommend also getting one of our 825ml Dispensers, and some of our 200ml / 1500ml mixing Nozzles, which will enable you to dispense the adhesives out of these Cartridges. These empty Cartridges can be used to fill, store, and dispense. 

    It's perfect for storing and applying bulk adhesives that use a 10:1 mix ratio, where precise metering and mixing is needed.  for example, 2-part adhesives, epoxies, silicones, urethanes, and other 2-part fluids and compounds.

    These 2-Part Cartridges are industrial grade and silicone free.  The Cartridge design/fit using the industrial standard "J-System" template.  The 2-Part design keeps the two adhesive parts separate, until a separate mixing Nozzle is attached, where the two parts are pushed or extruded into the mixing Nozzle and bonding or curing begins. 

    Dispensers are available for all size Cartridges either in manual of pneumatic.  The “J” System is comprised of a hand-held manual Dispenser which dispenses 2-component adhesives through “J” System Cartridges and motionless mixers.  Cartridge systems are available in a variety of volumetric ratios. Please be sure to select the correct ratio for your two component system.


    We Also Recommend


    x

    ×
    Welcome Newcomer