Maven F-System Mixing Nozzle for 10:1 & 4:1 ratio cartridges (200ml, 225ml, 250ml, 400ml, 490ml) BackUp Substitute for (MFHX 08-24T )
Need Datasheets? Need Accessories?
• Click Here to visit our Datasheet Server (TDS, SDS, Fact Sheets, Selector Guides, etc)• Check out Popular Accessories below by scrolling down just a bit on this page.
Regular price
$ 2.49 USD
5890 units available
The Maven F-System series static mixing nozzles are backup parts for the MedMix product line. When it is not available, the Maven mixing nozzle can be used to keep your team going.
It is designed to be used with the F Series cartridges, both 10:1 and 4:1 ratios. The Maven helix mixer gives excellent mixing in a traditional round element configuration/footprint. If you're concerned about getting a good quality mix, you cannot go wrong with helix mixing nozzles.
For Use with These Adhesives:
- Epoxy
- Acrylics/Acrylates/MMA's
- Silicones
- Urethanes
- Other High Viscosity Adhesives
For Use with:
Product Specs:
- Part Number MFHX 08-24T (102476)
- Mixing Elements: 24
- Round/Helix design
- Tip Type: Stepped
- Inner Diameter: 8mm
- Length: 9.2 inches, 234mm
- Works With: 10:1 or 4:1 Adhesives
- Use With: F-System Cartridges
| ID | Article | Number of Elements | Inner Diameter Ø mm/inch | Waste Volume (mL) | Bulk Pack Size |
| 102473 | MFHX 06-18T | 18 | 6.0/0.236 | 4.16 | 1700 |
| 102474 | MFHX 06-24T | 24 | 6.0/0.236 | 5.2 | 1400 |
| 113275 | MFHX 06-32T | 32 | 6.0/0.236 | 6.56 | 1200 |
| 102475 | MFHX 08-18T | 18 | 8.0/0.315 | 7.28 | 1400 |
| 102476 | MFHX 08-24T | 24 | 8.0/0.315 | 9.14 | 1200 |
| 112720 | MFHX 08-32T | 32 | 8.0/0.315 | 11.55 | 900 |
| 102477 | MFHX 10-18T | 18 | 10.0/0.394 | 12.96 | 1000 |
| 102478 | MFHX 10-24T | 24 | 10.0/0.394 | 16.7 | 900 |
| 113250 | MFHX 10-32T | 32 | 10.0/0.394 | 21.22 | 500 |
| 151605 | MFHX 13-18T | 18 | 13.0/0.512 | 20.73 | 800 |
| 151606 | MFHX 13-24T | 24 | 13.0/0.512 | 26.48 | 600 |
