Maven Coatings T2CI Hydrophobic Corrosion and Ice Formation Inhibitor Clear Coat for Metals & Concrete, Liquid Glass Sealant
Maven Coatings T2CI Hydrophobic Corrosion and Ice Formation Inhibitor for Raw/Bare Metals, Painted/Coated Metal & Concrete Surfaces. T2CI is a Nano-Scale Ceramic Quartz-based clear coat that protects most metals, alloys, concrete, brick and other masonry surfaces by creating a long-lasting impervious barrier against all kinds of environmental and chemical risks.
It cures at room tempture, or comfortable outdoor temperatures, with no need for a heat/oven bake curing step.
T2CI is an excellent Corrosion Inhibitor and Ice Formation Inhibitor, as its hydrophobic properties and hard impermeable thin surface coating layer provides both a hard protective shell and wisks moisture away from surfaces. T2CI's hardened impermeable layer compbined with it's hydrophobic properties virtually elimiantes rust, patinas, and other types of corrosion. And for Ice, T2CI's hydrophobic properties eliminates the capillary effect of water so ice never forms on the surface. It beads up as it freezes and falls to the side.
Stop Corrosion, Ice Formation, material degredation and disintegration without compromising structural load or integrity. Protect from not just one, but a wide, comprehensive list of environmental factors. Maven Coatings T2CI blows away other corrison inhibiting coating options with unmatched chemical bonding and unbelievable nanoscale coverage over any surface profile. Extremelly long lasting & low maintenance.
The Maven Coatings T2CI provides an ultra-durable weather, corrosion, ice formation, and wear resistant clear coating. It avoids common protection failures like peeling or flaking. Maven Coatings T2CI Corrosion and Ice Formation Inhibitor can be applied over the complimentary product Maven Coatings AT1C Quick Seal & Prep for a complete concrete protection system.
Surfaces to Use on:
• Raw Metals (Carbon Steel, Stainless Steel, Galvanized Steel, Iron, Aluminum, Copper, Brass, Bronze)
• Painted & Coated Metals (powder coated, primed, painted, existing sealants)
• Concrete (flooring, walls, cinder blocks & concrete blocks, unglazed brick & tile, pavers, countertops)
Popular for coating: Tons of uses: Aircraft, Vehicles, Campers, Mobile Homes, RVs, Public Works Bridges, Tables, Concrete Flooring, Countertops, Shop Floors, Protecting Floor Markings, High Traffic Flooring, Street Signs, Park Signs, Outdoor Signage
Industries currently using: Aviation & Aerospace, Airliners, Manufacturing, Municipalities, Government, Military, Restaurants, Auto Dealerships, Cabinet Makers, Sign Makers.
• Thin ultra-hard impervious quartz layer atop metal and concrete
• Anti Corrosion, stops it dead (permanently blocks accesss to oxygen, corrossion cannot occur)
• Moisture Repellent, Hydrophobic
• Resists Fuel & Oils
• Resists Hydrolic Fuels, even Skydrol
• Resists Graffiti, Inks, Dyes
• Hard and yet Flexible (because the coat layer is ultra-thin)
• Scratch resistant
• Extreme Heat resistant
• High Abrasion Resistant
• No Flaking, No Pealing
• Resists Animal & Organic Waste
• Resists Salts, Chlorides, & De-Icers, even
• Chemically inert and corrosion resistant
• Prevents oxidation, UV damage, and moisture damage
Superior resistance against:
- Rust & Oxidation
- Acid Rain & Acidic Damage
- Ice Damage
- Chlorides & salt spray
- UV damage
- Galvanic corrosion
- Animal, Bird & Organic waste damage
Available in: 8-oz Spray, Quart Kit, Gallon Kit, 5-Gallon Kit, 250-Gallon Tote
How to apply:
Pressure sprayers: Apply using standard high-volume low-pressure sprayer (HVLP… popular with paint spraying and airbrushing) or hand-pump pressure sprayers with a 1.0-1.3 spray tip and air pressure set at 25 to 30 psi. Spray test pattern on cardboard or paper to ensure suitable 8“to 10” elongated spray pattern is achieved (approximately 1 ½” wide in the middle and fluid enough to cover but not puddle). Apply two thin coats, wet-on-tack, 2-3 WFT each, top to bottom, then right to left, keeping a wet edge. Second coat must be applied within 10-15 minutes while first coat is still tacky for optimum results.
Standard Paint Rollers: Use a high density ultra-smooth foam roller or ¼” nap roller to apply the coating in an up and down then left to right pattern to ensure complete coverage of the surface. Avoid overworking coating. Apply coating thinly, 2.0 to 3.0 wet film thicknesses (WFT) and continue forward. Avoid down pressure on the roller for best results in finish appearance.
Brush Application: Use high-quality China bristle to apply T2AM in a cross-pattern; up and down, then left and right as quickly as possible. Avoid overworking coating, as it dries quickly. Avoid down pressure on the brush for best results in finish appearance. Apply light strokes using the tip brush to smooth out coating if necessary. Desired wet film thickness (WFT) is approximately 2.0 to 2.5 mils.
Dip Application: Apply a blanket of nitrogen gas over Maven Coatings T2CI in dip tank to prevent flashing of solvents and evaporation of product. Dip and agitate items (back and forth, up and down); remove to dry rack.