{"product_id":"insulcast-i-cast-333-neutral","title":"Insulcast I-Cast 333 Neutral Epoxy Potting Compound","description":"\u003cp\u003eInsulcast 333 Neutral is a self-extinguishing epoxy potting and casting compound for electronics that have to survive heat, moisture and vibration. It is UL 94 V-0 recognized (UL file E86165), moderate in viscosity, and filled for thermal conductivity, so it carries heat away from coils, transformers and power components while it seals them in. The neutral color lets you see the potted assembly after cure for inspection or rework.\u003c\/p\u003e\n\u003cp\u003e333 Neutral is the resin (Part A). It cures with an Insulcure hardener (Part B), and the hardener you pick sets the pot life, the cure schedule and the service temperature. Buy it as a kit with the hardener matched to the pail, or buy the resin alone if you already stock hardener. If you want the components hidden, look at \u003ca href=\"\/products\/insulcast-i-cast-333\"\u003eInsulcast I-Cast 333\u003c\/a\u003e in black.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL 94 V-0 self-extinguishing:\u003c\/strong\u003e recognized under the UL component program, file E86165.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoves heat:\u003c\/strong\u003e thermal conductivity of about 0.62 W\/mK pulls heat out of hot-running parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo hardener choices:\u003c\/strong\u003e Insulcure 20 for room temperature cure and a 1 hour pot life, or Insulcure 11B for a 2.5 hour pot life and 155°C (311°F) service after heat cure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical isolation:\u003c\/strong\u003e 410 to 430 volts\/mil dielectric strength and 1 x 10\u003csup\u003e15\u003c\/sup\u003e ohm-cm volume resistivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid and strong:\u003c\/strong\u003e Shore D 85, 11,500 to 12,000 psi tensile and up to 19,500 psi flexural strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSee what you potted:\u003c\/strong\u003e neutral resin color for visual inspection after cure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eChoose Your Option\u003c\/h3\u003e\n\u003cp\u003eEach kit is one 5 gallon pail of 333 Neutral resin plus the matching Insulcure hardener, shipped together. Kits are sold as Fresh Batch only. The resin-only pail is also offered as Short Shelf Life and Recently Expired at a discount.\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eWhat You Get\u003c\/th\u003e\n\u003cth\u003eMix Ratio by Weight\u003c\/th\u003e\n\u003cth\u003ePot Life (100 g @ 77°F)\u003c\/th\u003e\n\u003cth\u003eCure\u003c\/th\u003e\n\u003cth\u003eService Temperature\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e5 Gallon Kit with Insulcure 20\u003c\/td\u003e\n\u003ctd\u003e1 x 5 gal pail 333 Neutral + 1 x 1 gal Insulcure 20\u003c\/td\u003e\n\u003ctd\u003e100:12-16\u003c\/td\u003e\n\u003ctd\u003e1 hour\u003c\/td\u003e\n\u003ctd\u003e8 to 12 hr at 77°F, or 2 hr at 122°F\u003c\/td\u003e\n\u003ctd\u003eUp to 105°C (221°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5 Gallon Kit with Insulcure 11B\u003c\/td\u003e\n\u003ctd\u003e1 x 5 gal pail 333 Neutral + 3 x 1 qt Insulcure 11B\u003c\/td\u003e\n\u003ctd\u003e100:8\u003c\/td\u003e\n\u003ctd\u003e2.5 hours\u003c\/td\u003e\n\u003ctd\u003eHeat cure, 2 hr at 212°F (see below for large masses)\u003c\/td\u003e\n\u003ctd\u003eUp to 155°C (311°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5 Gallon Pail, Resin Only\u003c\/td\u003e\n\u003ctd\u003e1 x 5 gal pail 333 Neutral, no hardener\u003c\/td\u003e\n\u003ctd colspan=\"4\"\u003eUse with Insulcure 20 or Insulcure 11B, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eHow much hardener:\u003c\/strong\u003e the gallon of Insulcure 20 covers a full pail at 100:12. If you run toward 100:16, plan on extra \u003ca href=\"\/products\/insulcast-i-cure-20\"\u003eInsulcure 20\u003c\/a\u003e. Three quarts of Insulcure 11B covers a full pail at 100:8 with a little to spare. Extra \u003ca href=\"\/products\/insulcast-i-cure-11b\"\u003eInsulcure 11B\u003c\/a\u003e is sold in quarts and gallons.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eUncured properties\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eInsulcast 333 Neutral\u003c\/th\u003e\n\u003cth\u003eInsulcure 20\u003c\/th\u003e\n\u003cth\u003eInsulcure 11B\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eNeutral\u003c\/td\u003e\n\u003ctd\u003eAmber\u003c\/td\u003e\n\u003ctd\u003eAmber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eViscosity @ 77°F (25°C)\u003c\/td\u003e\n\u003ctd\u003e13,000 cP\u003c\/td\u003e\n\u003ctd\u003e700 cP\u003c\/td\u003e\n\u003ctd\u003e700 cP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecific gravity\u003c\/td\u003e\n\u003ctd\u003e1.55\u003c\/td\u003e\n\u003ctd\u003e0.98\u003c\/td\u003e\n\u003ctd\u003e0.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMix ratio by weight\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003ctd\u003e12 to 16\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixed viscosity\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e3,000 cP\u003c\/td\u003e\n\u003ctd\u003e3,000 cP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePot life, 100 g @ 77°F\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e1 hour\u003c\/td\u003e\n\u003ctd\u003e2.5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life @ 77°F\u003c\/td\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eCured properties\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eWith Insulcure 20\u003c\/th\u003e\n\u003cth\u003eWith Insulcure 11B\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness (ASTM D2240)\u003c\/td\u003e\n\u003ctd\u003eShore D 85\u003c\/td\u003e\n\u003ctd\u003eShore D 85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength (ASTM D638)\u003c\/td\u003e\n\u003ctd\u003e11,500 psi\u003c\/td\u003e\n\u003ctd\u003e12,000 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile elongation\u003c\/td\u003e\n\u003ctd\u003e2.75%\u003c\/td\u003e\n\u003ctd\u003e3.75%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength (ASTM D790)\u003c\/td\u003e\n\u003ctd\u003e17,500 psi\u003c\/td\u003e\n\u003ctd\u003e19,500 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength (ASTM D695)\u003c\/td\u003e\n\u003ctd\u003e14,000 psi\u003c\/td\u003e\n\u003ctd\u003e14,500 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoefficient of thermal expansion\u003c\/td\u003e\n\u003ctd\u003e48 x 10\u003csup\u003e-6\u003c\/sup\u003e \/°C\u003c\/td\u003e\n\u003ctd\u003e48 x 10\u003csup\u003e-6\u003c\/sup\u003e \/°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermal conductivity\u003c\/td\u003e\n\u003ctd\u003e4.3 BTU-in\/ft²·hr·°F (about 0.62 W\/mK)\u003c\/td\u003e\n\u003ctd\u003e4.2 BTU-in\/ft²·hr·°F (about 0.61 W\/mK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat distortion point\u003c\/td\u003e\n\u003ctd\u003e80°C (176°F)\u003c\/td\u003e\n\u003ctd\u003e155°C (311°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e105°C (221°F)\u003c\/td\u003e\n\u003ctd\u003e155°C (311°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric strength (ASTM D149)\u003c\/td\u003e\n\u003ctd\u003e410 volts\/mil\u003c\/td\u003e\n\u003ctd\u003e430 volts\/mil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric constant, 1 kHz (ASTM D150)\u003c\/td\u003e\n\u003ctd\u003e4.4\u003c\/td\u003e\n\u003ctd\u003e4.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDissipation factor, 1 kHz (ASTM D150)\u003c\/td\u003e\n\u003ctd\u003e0.02\u003c\/td\u003e\n\u003ctd\u003e0.02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume resistivity (ASTM D257)\u003c\/td\u003e\n\u003ctd\u003e1 x 10\u003csup\u003e15\u003c\/sup\u003e ohm-cm\u003c\/td\u003e\n\u003ctd\u003e1 x 10\u003csup\u003e15\u003c\/sup\u003e ohm-cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlammability\u003c\/td\u003e\n\u003ctd\u003eUL 94 V-0, file E86165\u003c\/td\u003e\n\u003ctd\u003eUL 94 V-0, file E86165\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eData is typical (ITW Technical Bulletin #3118) and not for specification. Test your own parts before production.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremix the resin:\u003c\/strong\u003e stir 333 Neutral in its original pail until any settled filler is fully back in suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeigh, don't eyeball:\u003c\/strong\u003e weigh out the resin, then weigh in the hardener at 100:12-16 for Insulcure 20 or 100:8 for Insulcure 11B.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix:\u003c\/strong\u003e blend thoroughly, scraping the sides and bottom of the container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDegas:\u003c\/strong\u003e pull vacuum for 2 to 5 minutes if you need void-free castings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePour:\u003c\/strong\u003e fill the cavity or mold inside the pot life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure:\u003c\/strong\u003e with Insulcure 20, 8 to 12 hours at 77°F (25°C) or 2 hours at 122°F (50°C). With Insulcure 11B, 2 hours at 212°F (100°C) for masses under 1\/2 lb. For larger masses, cure 2 hours at 176°F (80°C) then 2 hours at 212°F (100°C). For the best high temperature properties, post cure 1 hour at 302°F (150°C).\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eStorage and Shelf Life\u003c\/h3\u003e\n\u003cp\u003eShelf life is 12 months at 77°F (25°C) for the resin and both hardeners. Store in a cool, dry place with lids tight. The filler settles in shipping and storage, so remix the resin well before every use. Our \"Short Shelf Life\" and \"Recently Expired\" resin options are priced for shop use where you will use the material quickly. Run a test pour before using older material on production parts.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and Shipping\u003c\/h3\u003e\n\u003cp\u003eThe resin causes skin and eye irritation and may cause an allergic skin reaction. Both hardeners are corrosive amines that cause severe skin burns and eye damage, and Insulcure 20 also carries reproductive toxicity and inhalation warnings. Wear chemical-resistant gloves and eye protection, work with good ventilation, and read each Safety Data Sheet before use. Intended for industrial and commercial use by trained users.\u003c\/p\u003e\n\u003cp\u003eAll options ship as regulated hazardous materials:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulcast 333 Neutral resin:\u003c\/strong\u003e UN3082, Environmentally hazardous substance, liquid, n.o.s., Class 9, Packing Group III, marine pollutant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulcure 20:\u003c\/strong\u003e UN2735, Amines, liquid, corrosive, n.o.s., Class 8, Packing Group II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulcure 11B:\u003c\/strong\u003e UN2922, Corrosive liquid, toxic, n.o.s., Class 8 (6.1), Packing Group II\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Insulcast","offers":[{"title":"Fresh Batch \/ 5 Gallon Kit with Insulcure 20 (1 gal)","offer_id":68100246405374,"sku":"INSL_I-CAST333NEU_05G_KIT_IC20","price":881.53,"currency_code":"USD","in_stock":true},{"title":"Fresh Batch \/ 5 Gallon Kit with Insulcure 11B (3 x 1 qt)","offer_id":68100246438142,"sku":"INSL_I-CAST333NEU_05G_KIT_IC11B","price":1457.95,"currency_code":"USD","in_stock":true},{"title":"Fresh Batch \/ 5 Gallon Pail - Resin Only, No Hardener","offer_id":48846152007934,"sku":"INSL_I-CAST333NEU_05G_PARTA","price":718.42,"currency_code":"USD","in_stock":true},{"title":"Short Shelf Life (1-3 Mths Left) \/ 5 Gallon Pail - Resin Only, No Hardener","offer_id":68100246470910,"sku":"SL_INSL_I-CAST333NEU_05G_PARTA","price":537.99,"currency_code":"USD","in_stock":false},{"title":"Recently Expired \/ 5 Gallon Pail - Resin Only, No Hardener","offer_id":68100246503678,"sku":"XP_INSL_I-CAST333NEU_05G_PARTA","price":358.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/Insulcast_5_gallon_pail_c4752bc7-475a-43ce-8a64-754c58352093.png?v=1788369884","url":"https:\/\/www.perigeedirect.com\/products\/insulcast-i-cast-333-neutral","provider":"Perigee Direct","version":"1.0","type":"link"}