DAI Epoxy EA 560 - Slow Set 60-120 Min Epoxy - Medium Viscosity Clear-1:1 ratio

DAI Products

SKU: DAI_EA530_050ML

  • $ 1,750.00
    (We can use your FedEx/UPS acct: Type-in the needed Acct # & Service Level)


    DAI Epoxy EA560 is a 2-part Medium Viscosity epoxy adhesive with a long / slow set time of 60 minutes to 120 minutes, or 1 hour to 2 hours.  When mixed in equal volumes of resin and hardener, it reacts to give a rigid and tough bond. This product is clear with a mild yellow tint, non shrinking and gives excellent adhesion. EA 560 is recommended to bond various materials like metals, glass, wood, FRP, concrete, stone and ceramics.  It has a set time (working life) of 60 to 120 minutes,  and handling strength can be achieved in about 4 hours. Give excellent bond strength on various substrates.

    Please Note:  These cartridges are designed to work best with a 50ml or 400ml cartridge Dispenser, respectively.  We advise you use a 50ml or 400ml Dispenser for all respective cartridges.  If you do not have one, please check out our Dispensers, all are excellent products and have our 'it's good' seal of approval.

    If you prefer not to use a Dispenser, we have some 50ml kits that include hand tools or caulking gun adapters, as pictured, that you can use for fast small jobs.  But the 400ml cartridges really need to use a 400ml Dispenser, they're just too big to effectively use without the dispenser.

    Key Features

    • 60 to 120 minute Set Time / Working Time
    • Handling Strength 4 hours
    • Excellent General Purpose, Fast-Set Epoxy Adhesive for Craftsman and Industrial uses
    • Bonds to wide variety of materials
    • Electrically Insulating (does not conduct)
    • Excellent resistance to water and solvents

     Cured Product Characteristics

    Color: clear with very pale yellowish tint
    Work life (10 gm mass): 30 minutes
    Handling strength: 2 hours
    Full cure: 24 hours
    Mixing Ratio: 1:1

    Mixed viscosity: 10,000 cP

    Operating temp: -40F to 180F (-40C to 80C)
    Shore D Hardness: 80
    VOC Content: 0.1%


    Properties of uncured material (Resin)
    Specific Gravity: 1.1
    Viscosity@25°C, cP: 10,000 - 15,000
    Color: Clear


    Properties of uncured material (Activator)
    Specific Gravity: 0.96
    Viscosity@25°C, cP: 8,000 - 12,000
    Color: Clear pale yellow

    Tensile Strength: 1500 psi

    Elongation (Failure strain): 6-18%
    Chemical resistance: Excellent resistant to hydrocarbons, acids and bases and polar solvents.


    Directions of applications
    Wipe off and degrease the surface to be bonded. Use safety glasses and gloves to avoid skin contact. Dispense a desirable amount of adhesive using a dispensing gun. The nozzle sizes can be selected according to the desired bond thickness. Join the substrates with in 60 minutes and allow it to cure at room temperature. Do not disturb the parts during the curing process. Excess adhesive can be wiped off. (For optimum strengths, surface preparation for the metals like sandblast, etching will be needed).


    Safety and handling
    Wear safety glasses and gloves. Contains mercaptan and amine accelerators. Do not breathe vapors. Keep out of the reach of children. Once used keep the containers closed.


    Storage and shelf life
    Store the product between 60-80℉. Shelf life is 15 months if stored as recommended.


    We Also Recommend


    x

    ×
    Welcome Newcomer