{"product_id":"boabond-structural-wall-repair-adhesive-50ml-refill-cartridge","title":"BoaBond Structural Wall Repair Adhesive, 50ml Refill Cartridge","description":"\u003ch2\u003eBoaBond Structural Wall Repair 50ml Refill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRefill cartridge only:\u003c\/strong\u003e This product includes one 50ml BoaBond Structural Wall Repair adhesive cartridge. A compatible 4:1 dispenser, static mixing nozzle, mesh, injection plate, and other application accessories are required and sold separately.\u003c\/p\u003e\n\u003cp\u003eBoaBond SWR is a two-component structural foaming epoxy designed to restore strength to damaged drywall, wood, plaster, concrete, brick, and masonry. The adhesive expands 35%–65% to fill irregular voids, then cures into a rigid, high-density repair that will not shrink or sag. It is intended for structural anchor and fastener repairs rather than cosmetic surface patching alone.\u003c\/p\u003e\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRepairing drywall anchor blowouts and stripped screw holes\u003c\/li\u003e\n\u003cli\u003eReinstalling towel bars, curtain rods, toilet-paper holders, signage, and wall décor\u003c\/li\u003e\n\u003cli\u003eReinforcing damaged mounting points in drywall, plaster, wood, concrete, block, or brick\u003c\/li\u003e\n\u003cli\u003eFilling irregular voids behind damaged wall surfaces\u003c\/li\u003e\n\u003cli\u003eFacility-maintenance and retrofit reinforcement for wall-mounted hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrywall and fiber-reinforced wall panels\u003c\/li\u003e\n\u003cli\u003eWood\u003c\/li\u003e\n\u003cli\u003ePlaster\u003c\/li\u003e\n\u003cli\u003eConcrete and concrete block\u003c\/li\u003e\n\u003cli\u003eBrick and masonry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTest on the actual substrate and repair configuration before use. Surface condition, hole size, fastener type, and installation method affect performance.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eApplication Instructions\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the repair:\u003c\/strong\u003e Wear gloves and eye protection. Remove loose or crumbling material and clean away dust, dirt, and debris. A clean, dry surface provides the most consistent results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall the support material:\u003c\/strong\u003e For wall blowouts, cut mesh large enough to reinforce the damaged opening and press it into place. Position the injection plate over the opening with the port facing upward, then secure it with painter’s tape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the cartridge:\u003c\/strong\u003e Load the cartridge into a compatible 4:1 dispenser. Remove the cap, purge a small amount from both sides, attach the correct static mixing nozzle, and dispense a short waste bead until the mixture is uniform light grey.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill the void:\u003c\/strong\u003e Insert the nozzle and inject from the back of the repair toward the front until the cavity is filled. Cover or tape the injection port as needed to contain the expanding adhesive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow the repair to cure:\u003c\/strong\u003e Return-to-service time varies with hole size, temperature, and repair geometry. Fasteners can often be reinstalled within approximately one hour. Full cure is 24 hours, and full strength develops in seven days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish the surface:\u003c\/strong\u003e After curing, sand the repair flush. Drill a pilot hole when appropriate, reinstall the fastener, and paint or texture the surface to match.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCleanup:\u003c\/strong\u003e Remove uncured adhesive with alcohol following the manufacturer’s guidance. Cured adhesive must be removed mechanically by sanding or scraping.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1905\" height=\"748\" src=\"https:\/\/www.youtube.com\/embed\/n1UKjqVrIvc\" title=\"BoaBond SWR Demo AM at ISA2025\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Performance Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003ePublished Value\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct format\u003c\/td\u003e\n\u003ctd\u003eTwo-component structural foaming epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage\u003c\/td\u003e\n\u003ctd\u003eOne 50ml refill cartridge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMix ratio\u003c\/td\u003e\n\u003ctd\u003e4:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixed color\u003c\/td\u003e\n\u003ctd\u003eLight grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking time\u003c\/td\u003e\n\u003ctd\u003e3–5 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVolume expansion\u003c\/td\u003e\n\u003ctd\u003e35%–65%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull strength\u003c\/td\u003e\n\u003ctd\u003e7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003e50°F–95°F (10°C–35°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService temperature\u003c\/td\u003e\n\u003ctd\u003e-40°F–95°F (-40°C–35°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad performance\u003c\/td\u003e\n\u003ctd\u003eSupports up to 50 lb from a single anchor point under the manufacturer’s published test conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended dispenser\u003c\/td\u003e\n\u003ctd\u003eDS51-compatible 4:1 dispenser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended nozzle\u003c\/td\u003e\n\u003ctd\u003eMBQX 05-24L static mixing nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eImportant Safety Information\u003c\/h2\u003e\n\u003cp\u003eRead both parts’ Safety Data Sheets before use. Work with adequate ventilation and wear suitable gloves and eye protection. Avoid skin and eye contact. Keep out of reach of children.\u003c\/p\u003e","brand":"BoaBond","offers":[{"title":"Fresh Batch \/ 50ml Cartridge","offer_id":67629647495422,"sku":"BOABOND_SWR_50ML","price":10.59,"currency_code":"USD","in_stock":true},{"title":"Short Shelf Life (1-3 Mths Left) \/ 50ml Cartridge","offer_id":68015189524734,"sku":"SL_BOABOND_SWR_50ML","price":8.99,"currency_code":"USD","in_stock":false},{"title":"Recently Expired \/ 50ml Cartridge","offer_id":68015189557502,"sku":"XP_BOABOND_SWR_50ML","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/boa-swr.png?v=1790961575","url":"https:\/\/www.perigeedirect.com\/products\/boabond-structural-wall-repair-adhesive-50ml-refill-cartridge","provider":"Perigee Direct","version":"1.0","type":"link"}