Black UV Resistant 50ml Empty 1:1 Ratio Dual-Barrel Cartridges & Pistons
Black-color High-Density Dual-Barrel (dual-component) 1:1 ratio 50ml empty Adhesive Cartridge with included easy-to-install Sealing Pistons and Reseal-able end-cap.
Nordson EFD Cartridge Part Number: 7702622
Key feature of this cartridge is it's Black UV Resistant color, which is perfect for light-sensitive, light-curable, and/or UV-curable formulas.
This kit can be used to fill, store, and dispense 2-part adhesives, epoxies, silicones, urethanes, and other 2-part fluids and compounds.
Each kit includes either 5, 10, 25, 50, or 100 of the cartridges, easy-to-install Sealing Pistons and Reseal-able end-cap.
Perfect for storing and applying bulk adhesives that use a 1:1 mix ratio, where precise metering and mixing is needed.
NOTE: The included hand plungers work best with thin or low viscosity adhesives. In fact, using the included manual hand plunger with many thicker 2-part adhesives can be difficult to mix and push out of the cartridge. If you are using medium or thick/low viscosity adhesives, we recommend also getting one of our 50ml Dispensers, which will vastly improve the ability to dispense the adhesives out of these cartridge kits.
These Dual-Barrel cartridges are industrial grade and silicone free. The cartridge design/fit using the "A-System", also known as "Square-Back". The Dual-Barrel design keeps the two adhesive parts separate, until a separate mixing nozzle is attached, where the two parts are pushed or extruded into the mixing nozzle and bonding or curing begins.
The included 3-inch long mixing nozzles are of the "bayonet" design, which easily twist on and off the cartridge end. These nozzles tend to be difficult to clean and store after their first use, and therefore generally considered to be single-use accessories. These Cartridges use standard static mixer nozzles.
Products are industrial grade safe to 100 psi and are certified silicone free. Dispensers are available for all size cartridges either in manual of pneumatic. The “A” System is comprised of a small lightweight, hand-held manual dispenser which dispenses 2-component adhesives through “A” System cartridges and motionless mixers. Cartridge systems are available in a variety of volumetric ratios. Please be sure to select the correct ratio for your two component system.
We Also Recommend
EPX Mixing Nozzle Multi-Packs-fits 3M 50ml Duo-Pak Adhesive Cartridges (Shorter 16-element, 3.5in, 1:1 & 2:1 ratios)
Small Mixing Nozzles for 50ml Cartridges - 3 5/16-inch 13-element Static Mixers
Quadro Square Hi-Efficiency Mixing Nozzles for 50ml Cartridges (4.5-inch 24-element)
50ml Empty 1:1 Ratio Dual-Barrel Cartridges with sealing cap & pistons