Aron Alpha Gel 10-Industrial Krazy Glue (20g Kit with Accelerator and 12 tips)-Thick No-Drip Gel-Fast Set
Aron Alpha Gel 10-Industrial Krazy Glue instant (cyanoacrylate) adhesive KIT, including one 20-Gram Tube, one 120-gram Activator spray, and 12 soft dispensing tips. Gel 10 is a thick gel instant adhesive engineered for tough-to-bond situations. It's an ultra fast setting formula excellent for Vertical, porous surfaces, and when you really don't want the glue to drip or run. It stays where it's applied and dries fast. Excellent for Bonding plastic, metal and rubber. Key Characteristics: Thick Gel (Thixotropic) for filling large pores, gaps, and other difficult-to-bond or rough surfaces. Color: Clear, Gap Fill: any gap size Resin Base: Ethyl, Viscosity Cps: 170000 , Tensile Strength Steel (PSI): 4,600, Temperature Range: -65°F - 180°F, SetTime:5- 10 Sec for plastics 10-30 Sec for metals, Full Cure: 24 Hrs. Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminium, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminium, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer. Also, this product is not recommended for use in contact with strong oxidizing materials and polar solvents although will withstand a solvent wash without any bond strength deterioration. Users are reminded that all materials, whether innocuous or not, should be handled in accordance with the principles of good industrial hygiene.