50ml Empty 1:1 Ratio 2-Part Cartridges & Pistons - Black Nylon UV Resistant

Atlas Professional

SKU: AP5011CRTG_BLACK_ONLY_005PK

  • $ 2.99
    (We can use your FedEx/UPS acct: Type-in the needed Acct # & Service Level)


    2-Part (dual-component) Nylon Black 1:1 ratio 50ml empty Adhesive Cartridges with included Reseal-able Cap and Sealing Pistons.  Used for filling and dispensing 2-part adhesives, epoxies, silicones, urethanes, and other 2-part fluids and compounds.  

    Nordson EFD Cartridge Part Number: 7702622

    Available in 3 kit packages, plus Accessories:

    • Empty Cartridges and related Pistons 
    • Starter Kit with Small Hand Plungers
    • Starter Kit with Dispenser
    • Useful Additional Accessories

    Each kit includes different cartridge-count options… either 5, 10, 25, 50, or 100 cartridges with the necessary cap and sealing pistons to close and seal the empty cartridges.

    About the Cartridges:

    Key feature of this cartridge is it's Black UV Resistant color, which is perfect for light-sensitive, light-curable, and/or UV-curable formulas.  This cartridge can be used to fill, store, and dispense 2-part adhesives, epoxies, silicones, urethanes, and other 2-part fluids and compounds that have a 1:1 mix ratio, and especially Light & UV sensitive materials.

    These 2-Part cartridges are industrial grade and silicone free. The cartridge design/fit using the "A-System", also known as "Square-Back". The 2-Part design keeps the two adhesive parts separate, until a separate mixing nozzle is attached, where the two parts are pushed or extruded into the mixing nozzle and bonding or curing begins.

    About the Starter Kits:

    Each Starter Kit includes either 5, 10, 25, 50, or 100 cartridges, related sealing pistons and cartridge caps, mixing nozzles (one nozzle for each cartridge in your kit), and either one MixPac DMA50 50ml dispenser or small hand plungers depending on which kit you choose. 

    We recommend checking out our Starter Kits to get set up and running.  Or if you prefer getting the dispenser separately, check out the MixPac DMA50 50ml Dispensers, which will enable you to dispense the adhesives out of these cartridge kits.

    NOTE: The kit containing small hand plungers work best with thin or low viscosity adhesives. In fact, using the included manual hand plunger with many thicker 2-part adhesives can be difficult to mix and push out of the cartridge. If you are using medium or thick/low viscosity adhesives, we recommend also getting one of our 50ml Dispensers, which will vastly improve the ability to dispense the adhesives out of these cartridge kits.

    Within he Starter Kits, the included 3-inch long mixing nozzles are of the "bayonet" design, which easily twist on and off the cartridge end. These nozzles tend to be difficult to clean and store after their first use, and therefore generally considered to be single-use accessories. These Cartridges use standard static mixer nozzles.

    Products are industrial grade safe to 100 psi and are certified silicone free. Dispensers are available for all size cartridges either in manual of pneumatic. The “A” System is comprised of a small lightweight, hand-held manual dispenser which dispenses 2-component adhesives through “A” System cartridges and motionless mixers. Cartridge systems are available in a variety of volumetric ratios. Please be sure to select the correct ratio for your two component system.


    We Also Recommend


    x

    ×
    Welcome Newcomer