Newborn VR200A83 200ML 2-Part Pneumatic (Air) Dispenser (for all Sulzer MixPac MedMix 200ml C-System cartridges) - High Pressure for all viscosities and thicknesses

Newborn Dispensers

SKU: Newborn_Air_VR200A83_200ML_GUN_KIT

  • $690.00
    (We can use your FedEx/UPS acct: Type-in the needed Acct # & Service Level)
    Will not ship until


    Newborn VR200A83  200ML  2-Part Pneumatic (Air) Dispenser (for all Sulzer MixPac MedMix 200ml C-System cartridges) - High Pressure for all viscosities and thicknesses

    • Dual-component variable ratio pneumatic adhesive applicator for 200 mL cartridges in ratios of 1:1, 2:1, 4:1, and 10:1
    • 100 psi with 490 lb. of nominal thrust for use with high viscosity materials
    • Adjustable air pressure regulator to control flow and air dump valve to quickly stop flow
    • Push discs snap in and out for quickly changing adhesive cartridge size
    • Can be loaded from the side for quickly changing adhesive cartridge size

    The Newborn VR200A83 dual-component variable ratio pneumatic adhesive applicator, also called a two-part or two component applicator, can accommodate 200 mL cartridges in ratios of 1:1, 2:1, 4:1, and 10:1 and has 100 psi of pressure for applying two-component epoxies and other adhesives. The 100 psi pressure allows the applicator to be used with high viscosity materials. With a 2-1/2"-diameter cylinder, it has a nominal thrust of 490 lb. The adjustable air pressure regulator controls the flow of the material, and the air dump valve quickly stops the flow. The push discs snap in and out and the applicator can be loaded from the side for quickly changing the sizes of the adhesive cartridges.

    Caulking guns, also called caulk or cartridge guns, dispense a controlled flow of products such as caulk, sealants, and adhesives from a tube or cartridge. A manual caulking gun consists of a frame which holds the tube, a trigger, and a rod which moves forward when the trigger is depressed, dispensing the product. Manual caulking guns have a thrust ratio; the higher the thrust ratio, the easier it is to dispense the caulk, sealant, or adhesive. Air-powered or pneumatic caulking guns also have a frame and a trigger, but are used with an air pressure regulator that pushes the product from the tube using air pressure instead of a rod.

    Brand Name Newborn
    Global Trade Identification Number 20039922903100
    Length 23-3/4 inches
    Measurement System Inch
    Model Number VR200A83
    Number of Items 1
    Part Number VR200A83
    UNSPSC Code 27110000
    Width 10 inches

    Pneumatic/Air powered dispensers for a variety of ratios and cartridge sizes, as well for  the popular Nordson Ratio-Pack configurable Multi-Ratio Cartridge System.

    These dispensers are easily configured, with just a couple quick adjustments, to dispense most any ratio configuration of the Ratio-Pak system.

    ×
    Welcome Newcomer