{"product_id":"permabond-uv605-low-viscosity-uv-glue-for-glass-and-crystal-bonding","title":"Permabond UV605 Low Viscosity UV Glue for Glass and Crystal Bonding","description":"\u003cp\u003ePermabond UV605 is a very low viscosity, high strength adhesive that cures on exposure to UV light. Its optical clarity and resistance to yellowing make it a strong choice for glass and crystal bonds where the joint stays visible. At 75 cP it wicks into a joint by capillary action, so you can assemble parts first and apply the adhesive afterward.\u003c\/p\u003e\n\u003ch3\u003eKey Properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e Methacrylate ester, 100% solids, no solvents\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance:\u003c\/strong\u003e Colorless, low viscosity liquid (75 mPa.s at 25°C, 20 rpm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure wavelength:\u003c\/strong\u003e 365 to 400 nm UV light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixture time:\u003c\/strong\u003e 3 seconds under a high-intensity UV light guide, 4 seconds under a 100 mW\/cm² LED, 15 seconds under a 4 mW\/cm² handheld lamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile shear (steel to glass):\u003c\/strong\u003e 10 to 14 N\/mm² (1,450 to 2,000 psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile strength (ISO 37):\u003c\/strong\u003e 14 N\/mm² (2,000 psi), 90% elongation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e 65 to 75 Shore D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefractive index (cured):\u003c\/strong\u003e greater than 1.490\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService temperature:\u003c\/strong\u003e down to -55°C (-67°F). Handles brief heat exposure such as paint baking or wave soldering if the joint is not under heavy stress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Surfaces\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass and crystal:\u003c\/strong\u003e clear, strong bonds for visible joints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal:\u003c\/strong\u003e strong adhesion. Lightly abrade aluminum, copper and their alloys before bonding to remove the oxide layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlastics:\u003c\/strong\u003e test thermoplastics for compatibility first. Mold release agents can weaken the bond.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose UV605\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBond after assembly:\u003c\/strong\u003e the thin viscosity lets the adhesive wick into the joint once parts are already positioned.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCures with simple lamps:\u003c\/strong\u003e an inexpensive handheld UV lamp is enough. Higher-power industrial lamps cure it faster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStays clear:\u003c\/strong\u003e non-yellowing, so the joint looks good long term.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDirections and Handling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSurfaces should be clean, dry and grease-free. Isopropanol works for most degreasing. Remove any silicone residue from glass before bonding.\u003c\/li\u003e\n\u003cli\u003eOne substrate must let UV light through to the bond line.\u003c\/li\u003e\n\u003cli\u003eKeep the adhesive out of ambient light until you are ready to cure, and avoid trapping air in the joint.\u003c\/li\u003e\n\u003cli\u003eStore between 5°C and 25°C (41°F to 77°F), away from room lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOur Shelf Life Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh Batch:\u003c\/strong\u003e our newest stock, with the most shelf life remaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort Shelf Life:\u003c\/strong\u003e 1 to 3 months left before the expiration date. Good value if you will use it soon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecently Expired:\u003c\/strong\u003e past the printed date and sold as-is at a deep discount. Best for testing, prototypes and non-critical work. Run a test bond before relying on it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFor professional and industrial use. Keep away from strong oxidizing materials. Refer to the Safety Data Sheet for handling guidance.\u003c\/em\u003e\u003c\/p\u003e","brand":"Permabond","offers":[{"title":"Fresh Batch \/ 50ml (1.7 oz) \/ Bottle Only","offer_id":67641314836734,"sku":"PBND_UV605_050ML_BTL","price":58.0,"currency_code":"CAD","in_stock":true},{"title":"Short Shelf Life (1-3 Mths Left) \/ 50ml (1.7 oz) \/ Bottle Only","offer_id":67641339183358,"sku":"SL_PBND_UV605_050ML_BTL","price":46.0,"currency_code":"CAD","in_stock":false},{"title":"Recently Expired \/ 50ml (1.7 oz) \/ Bottle Only","offer_id":67641339216126,"sku":"XP_PBND_UV605_050ML_BTL","price":29.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/Permabond-UV605-50ml-1.jpg?v=1790961517","url":"https:\/\/www.perigeedirect.com\/en-ca\/products\/permabond-uv605-low-viscosity-uv-glue-for-glass-and-crystal-bonding","provider":"Perigee Direct","version":"1.0","type":"link"}