{"product_id":"loctite-290","title":"Loctite 290 Green Wicking Medium-High Strength Threadlocker","description":"\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eLOCTITE® 290™ is a green, low-viscosity, medium-to-high-strength anaerobic threadlocker designed to wick into already-assembled metal fasteners by capillary action. It cures when confined without air between close-fitting metal surfaces, helping prevent loosening and leakage caused by shock and vibration. It can also seal porosity in welds, castings, and powdered-metal parts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary Features \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWicks into preassembled threaded fasteners, reducing the need for disassembly\u003c\/li\u003e\n\u003cli\u003eLow-viscosity formula flows into close-fitting threads and fine porosity\u003c\/li\u003e\n\u003cli\u003eMedium-to-high-strength locking and sealing for metal assemblies\u003c\/li\u003e\n\u003cli\u003eHelps resist loosening and leakage from shock and vibration\u003c\/li\u003e\n\u003cli\u003eOne-component anaerobic adhesive; no mixing required\u003c\/li\u003e\n\u003cli\u003eFluoresces under UV light to support application inspection\u003c\/li\u003e\n\u003cli\u003eActivator can be used when faster curing is needed or gaps are larger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLocking and sealing preassembled threaded metal fasteners\u003c\/li\u003e\n\u003cli\u003eSecuring screws, bolts, and fittings in industrial equipment and machinery\u003c\/li\u003e\n\u003cli\u003eMaintenance and repair work where disassembly before application is impractical\u003c\/li\u003e\n\u003cli\u003eSealing porosity in welds, castings, and powdered-metal components\u003c\/li\u003e\n\u003cli\u003eVibration-resistant assemblies in automotive, transportation, manufacturing, and fluid-power equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClose-fitting metal surfaces including steel, stainless steel, brass, and plated metals\u003c\/li\u003e\n\u003cli\u003eCure speed varies by substrate, gap, temperature, and use of activator\u003c\/li\u003e\n\u003cli\u003eNot normally recommended for plastics, particularly thermoplastics that may stress-crack; confirm compatibility before use\u003c\/li\u003e\n\u003cli\u003eDo not use in pure oxygen or oxygen-rich systems, or as a sealant for chlorine or other strong oxidizing materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Properties:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTechnology: Acrylic\u003c\/li\u003e\n\u003cli\u003eChemical type: Dimethacrylate ester\u003c\/li\u003e\n\u003cli\u003eCure mechanism: Anaerobic; activator may be used as a secondary cure method\u003c\/li\u003e\n\u003cli\u003eColor \/ appearance: Green liquid\u003c\/li\u003e\n\u003cli\u003eComponents: One component; no mixing required\u003c\/li\u003e\n\u003cli\u003eStrength: Medium to high\u003c\/li\u003e\n\u003cli\u003eSpecific gravity at 25°C: 1.08\u003c\/li\u003e\n\u003cli\u003eBrookfield viscosity at 25°C: 20-55 mPa·s (cP)\u003c\/li\u003e\n\u003cli\u003eFluorescence: Positive under UV light\u003c\/li\u003e\n\u003cli\u003eBreakaway torque after 24 hours at 22°C on M10 steel nuts and bolts: 10 N·m (90 lb·in), ISO 10964\u003c\/li\u003e\n\u003cli\u003ePrevail torque after 24 hours at 22°C on M10 steel nuts and bolts: 29 N·m (260 lb·in), ISO 10964\u003c\/li\u003e\n\u003cli\u003eBreakloose torque on pre-torqued M10 steel nuts and bolts: 30 N·m (270 lb·in), ISO 10964\u003c\/li\u003e\n\u003cli\u003eMaximum prevail torque on pre-torqued M10 steel nuts and bolts: 40 N·m (350 lb·in), ISO 10964\u003c\/li\u003e\n\u003cli\u003eCompressive shear strength on steel pins and collars: at least 5.4 N\/mm² (780 psi), ISO 10123\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFor best results, clean the threads or area with a suitable LOCTITE® cleaning solvent and allow to dry.\u003c\/li\u003e\n\u003cli\u003eFor preassembled fasteners with through holes, apply several drops at the screw-and-body junction and allow the product to wick into the engaged threads. Avoid touching the bottle tip to metal.\u003c\/li\u003e\n\u003cli\u003eFor blind-hole assembly, apply several drops down the internal threads to the bottom of the hole before assembly.\u003c\/li\u003e\n\u003cli\u003eWhen cure speed is too slow or gaps are larger, apply a suitable LOCTITE® activator according to its instructions.\u003c\/li\u003e\n\u003cli\u003eFor porosity sealing, clean the area, heat it to approximately 121°C (250°F), allow it to cool to approximately 85°C (185°F), and then apply the product.\u003c\/li\u003e\n\u003cli\u003eFor disassembly, first use standard hand tools. If necessary because of excessive engagement length, heat the nut or bolt locally to approximately 250°C (482°F) and disassemble while hot.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eStorage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStore unopened in a dry, well-ventilated location in the original container.\u003c\/li\u003e\n\u003cli\u003eOptimal storage temperature: 8°C to 21°C (46°F to 70°F).\u003c\/li\u003e\n\u003cli\u003eStorage below 8°C or above 28°C (82°F) can adversely affect product properties.\u003c\/li\u003e\n\u003cli\u003eDo not return unused material to the original container because contamination can reduce shelf life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCertifications \/ Agency Approvals:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTested to the lot requirements of Military Specification Mil-S-46163A; regional approval\u003c\/li\u003e\n\u003cli\u003eNorth American production lots are tested to applicable general and detail requirements of ASTM D5363\u003c\/li\u003e\n\u003cli\u003eNSF Category P1 registered for use as a sealant where there is no possibility of food contact in and around food-processing areas; regional approval\u003c\/li\u003e\n\u003cli\u003eCertified to ANSI\/NSF Standard 61 for commercial and residential potable-water systems not exceeding 82°C (180°F); regional approval\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSafety \u0026amp; Transportation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWarning: Causes serious eye irritation, may cause respiratory irritation, and is harmful to aquatic life.\u003c\/li\u003e\n\u003cli\u003eUse only with adequate ventilation. Avoid breathing mist or vapor and wear eye protection; butyl or nitrile gloves are recommended.\u003c\/li\u003e\n\u003cli\u003eAccording to the supplied Australian SDS dated March 10, 2026, the product is not classified as dangerous goods under ADG road\/rail, IMDG marine, or IATA air transport rules.\u003c\/li\u003e\n\u003cli\u003eThe supplied SDS does not provide a U.S. DOT classification; confirm U.S. ground requirements against the current U.S. SDS before shipment.\u003c\/li\u003e\n\u003cli\u003eFor complete handling, first-aid, disposal, and transportation precautions, consult the current Safety Data Sheet.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"Fresh Batch \/ 6ML","offer_id":48982296166654,"sku":"LT_290_6ML","price":19.0,"currency_code":"CAD","in_stock":true},{"title":"Fresh Batch \/ 10ML","offer_id":48982316286206,"sku":"LT_290_10ML","price":29.0,"currency_code":"CAD","in_stock":true},{"title":"Fresh Batch \/ 50ML","offer_id":48982316318974,"sku":"LT_290_50ML","price":81.0,"currency_code":"CAD","in_stock":true},{"title":"Fresh Batch \/ 250ML","offer_id":48982316351742,"sku":"LT_290_250ML","price":242.0,"currency_code":"CAD","in_stock":true},{"title":"Short Shelf Life (1-3 Mths Left) \/ 6ML","offer_id":48982316384510,"sku":"SL_LT_290_6ML","price":15.0,"currency_code":"CAD","in_stock":false},{"title":"Short Shelf Life (1-3 Mths Left) \/ 10ML","offer_id":48982316417278,"sku":"SL_LT_290_10ML","price":23.0,"currency_code":"CAD","in_stock":false},{"title":"Short Shelf Life (1-3 Mths Left) \/ 50ML","offer_id":48982316450046,"sku":"SL_LT_290_50ML","price":67.0,"currency_code":"CAD","in_stock":false},{"title":"Short Shelf Life (1-3 Mths Left) \/ 250ML","offer_id":48982316482814,"sku":"SL_LT_290_250ML","price":199.0,"currency_code":"CAD","in_stock":false},{"title":"Recently Expired \/ 6ML","offer_id":48982316515582,"sku":"XP_LT_290_6ML","price":12.0,"currency_code":"CAD","in_stock":false},{"title":"Recently Expired \/ 10ML","offer_id":48982316548350,"sku":"XP_LT_290_10ML","price":15.0,"currency_code":"CAD","in_stock":false},{"title":"Recently Expired \/ 50ML","offer_id":48982316581118,"sku":"XP_LT_290_50ML","price":47.0,"currency_code":"CAD","in_stock":false},{"title":"Recently Expired \/ 250ML","offer_id":48982316613886,"sku":"XP_LT_290_250ML","price":171.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/download_06bddaf9-95c3-4ef1-a2d9-da711ace76df.png?v=1789665869","url":"https:\/\/www.perigeedirect.com\/en-ca\/products\/loctite-290","provider":"Perigee Direct","version":"1.0","type":"link"}