{"product_id":"boabond-seasnake-underwater-adhesive-one-part-non-sag-adhesive-for-wet-submerged-surfaces","title":"BoaBond SeaSnake Underwater Adhesive – One-Part, Non-Sag Adhesive for Wet \u0026 Submerged Surfaces","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eMake strong bonds without waiting for surfaces to dry. BoaBond SeaSnake is a one-part adhesive formulated for bonding in wet and underwater environments. It maintains tack on submerged surfaces and forms adhesive bonds when both applied and cured underwater, making it a practical choice for bonding tasks where moisture is part of the job.\u003c\/p\u003e\n\u003cp\u003eThe thick, non-sag formula allows application to surfaces in any orientation, including vertical and overhead areas. Its one-part design eliminates component mixing, while minimal surface-preparation requirements help simplify application. SeaSnake is intended for bonding metals, plastics, rubber, wood, and other materials in wet or underwater conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/c8ae314f-6d33-498d-8964-d10eff1ade46.png?v=1789059095\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWith a \u003cstrong\u003e20-minute underwater working time, 60-minute underwater firm set, and 24-hour underwater full cure\u003c\/strong\u003e, SeaSnake provides clearly defined application and curing milestones. Laboratory testing also documents its bonding performance after underwater application and curing.\u003c\/p\u003e\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eApplies and cures underwater:\u003c\/strong\u003e Formulated to wet submerged surfaces, retain tack, and establish adhesive bonds underwater—not simply resist water after curing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOne-part convenience:\u003c\/strong\u003e No measuring or mixing separate adhesive components before application.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThick, non-sag consistency:\u003c\/strong\u003e Supports application on horizontal, vertical, and overhead surfaces, with a reported vertical sag of 0.0 inches under ASTM D2202 testing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMinimal surface preparation:\u003c\/strong\u003e Remove loose dirt and debris before application. Additional cleaning with a wire brush or steel wool may improve adhesion by removing surface contamination.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand \/ product\u003c\/td\u003e\n\u003ctd\u003eBoaBond SeaSnake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eOne-part underwater adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConsistency\u003c\/td\u003e\n\u003ctd\u003eThick, non-sag, thixotropic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended application environments\u003c\/td\u003e\n\u003ctd\u003eWet and underwater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended bonding materials\u003c\/td\u003e\n\u003ctd\u003eMetals, plastics, rubber, wood, and other materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnderwater working time\u003c\/td\u003e\n\u003ctd\u003e20 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking time in dry conditions\u003c\/td\u003e\n\u003ctd\u003e1–2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnderwater firm set\u003c\/td\u003e\n\u003ctd\u003e60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnderwater full cure\u003c\/td\u003e\n\u003ctd\u003e24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVertical sag\u003c\/td\u003e\n\u003ctd\u003e0.0 inches, ASTM D2202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative density\u003c\/td\u003e\n\u003ctd\u003e1.3 at 72°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial weight per gallon\u003c\/td\u003e\n\u003ctd\u003e11 lb\/gal at 72°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003eApproximately one year under the TDS’s recommended storage conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eSpecifications are drawn from the supplied technical data sheet. Physical-property values are representative or typical, not guaranteed design specifications.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eTested Underwater Bonding Performance\u003c\/h2\u003e\n\u003cp\u003eThe performance table on \u003cstrong\u003epage 1 of the technical data sheet\u003c\/strong\u003e reports the following lap-shear results after underwater application and seven days of curing at 75°F. Testing was performed at MPI Laboratories in Bethlehem, Pennsylvania, using ASTM D1002.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eTested material \/ assembly\u003c\/th\u003e\n\u003cth align=\"right\"\u003eReported result\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCold-rolled steel\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e1,200 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMMA \/ polycarbonate\u003c\/td\u003e\n\u003ctd align=\"right\"\u003e600 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRigid PVC\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eSubstrate failure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardwood\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eSubstrate failure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConcrete\u003c\/td\u003e\n\u003ctd align=\"right\"\u003eSubstrate failure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e“Substrate failure” indicates that the material being bonded failed during testing; the TDS does not report a numerical bond-strength value for those tests. The listed strength results were measured after seven days and should not be presented as one-hour or 24-hour strength ratings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eSeaSnake is intended for wet-surface and underwater bonding involving metals, plastics, rubber, and wood. Its non-sag formulation also supports work on surfaces where adhesive must be applied vertically or overhead. The manufacturer’s application instructions describe working the adhesive onto areas requiring bonding or sealing.\u003c\/p\u003e\n\u003cp\u003eThe published testing specifically includes cold-rolled steel, PMMA\/polycarbonate, rigid PVC, hardwood, and concrete. These results describe the tested materials and conditions rather than establishing compatibility with every material within those categories.\u003c\/p\u003e\n\u003ch2\u003eBasic Application Instructions\u003c\/h2\u003e\n\u003cp\u003eOpen the sealed cartridge, trim the provided application tip to the desired bead size, and screw the tip onto the cartridge. Wipe the bonding surface clean to remove loose dirt and debris. When additional surface cleaning is needed, the TDS notes that a wire brush or steel wool may improve adhesion; wipe away remaining debris afterward.\u003c\/p\u003e\n\u003cp\u003eApply a generous bead to the bonding surface. Using a spatula or putty knife, work the adhesive across the surface with a shearing motion to wet the area requiring bonding or sealing. Observe the published underwater working, firm-set, and full-cure times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafe handling:\u003c\/strong\u003e Read the SDS before use. Use adequate ventilation, wear chemical-resistant gloves and appropriate eye protection, and avoid skin contact and inhalation of vapors or mist. The SDS identifies skin, eye, and respiratory hazards, including sensitization.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BoaBond","offers":[{"title":"Fresh Batch","offer_id":48933206360318,"sku":"BOABOND_SEASNAKE_1PK","price":97.0,"currency_code":"CAD","in_stock":true},{"title":"Short Shelf Life (1-3 Mths Left)","offer_id":48933206393086,"sku":"SL_BOABOND_SEASNAKE","price":85.0,"currency_code":"CAD","in_stock":true},{"title":"Recently Expired","offer_id":48933206425854,"sku":"XP_BOABOND_SEASNAKE","price":57.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/1_d7c194de-6b88-44c4-934e-0b956fad8fed.png?v=1789061084","url":"https:\/\/www.perigeedirect.com\/en-ca\/products\/boabond-seasnake-underwater-adhesive-one-part-non-sag-adhesive-for-wet-submerged-surfaces","provider":"Perigee Direct","version":"1.0","type":"link"}