{"product_id":"asi-5900-fast-grab-hybrid-adhesive","title":"ASI 5900 Fast Grab Hybrid Construction Adhesive - Immediate Green Strength","description":"\u003cp\u003e\u003cstrong\u003eASI 5900 Fast Grab Hybrid Adhesive is a one-part, gun-grade construction adhesive that develops immediate green strength to hold materials in place while it cures.\u003c\/strong\u003e Its 100% solids, solvent-free and isocyanate-free hybrid formula will not shrink, remains flexible after cure, and can bond a broad range of construction and industrial substrates—including damp surfaces where moisture is present.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImmediate grab:\u003c\/strong\u003e Develops green strength right away to reduce bracing, temporary fasteners, and assembly time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet-surface capability:\u003c\/strong\u003e Can cure on wet substrates or when moisture is present without the wash-off associated with water-based products.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo shrinkage:\u003c\/strong\u003e The 100% solids formula contains no solvent or water to flash off during cure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible, durable bond:\u003c\/strong\u003e Accommodates vibration and movement in construction, transportation, and manufactured assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad substrate range:\u003c\/strong\u003e Documented substrates include ceramics, fiberglass, glass, granite, marble, wood, stone, EPDM, aluminum, galvanized metal, EPS foam, porcelain, PVC, other plastics, concrete, and brick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent application:\u003c\/strong\u003e Gun-grade, non-slump material remains easy to dispense across a wide temperature range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eASI 5900 Fast Grab Hybrid Adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChemistry\u003c\/th\u003e\n\u003ctd\u003eOne-part hybrid adhesive; 100% solids; solvent-free and isocyanate-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eNatural white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003e2,100,000 cP (ASI test method; spindle 7 at 4 rpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConsistency\u003c\/th\u003e\n\u003ctd\u003eGun grade; passes non-slump testing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMix ratio\u003c\/th\u003e\n\u003ctd\u003eOne part; no mixing or additives required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGap fill\u003c\/th\u003e\n\u003ctd\u003eNo maximum gap-fill dimension stated in the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixture \/ green strength\u003c\/th\u003e\n\u003ctd\u003eImmediate green strength; no numerical fixture time stated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSkin formation\u003c\/th\u003e\n\u003ctd\u003e10 minutes at 70°F (21°C) and 50% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCure\u003c\/th\u003e\n\u003ctd\u003eMoisture cure; 13 mm (0.51 in) cure depth after 7 days at 70°F (21°C) and 50% RH. Strength continues developing for 7 days.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFull cure\u003c\/th\u003e\n\u003ctd\u003eNo single full-cure time stated; bead size, confinement, temperature, and humidity affect cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLap-shear strength\u003c\/th\u003e\n\u003ctd\u003e2.15 MPa (approximately 312 psi), ASTM D412 as listed in the TDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e1.58 MPa (approximately 229 psi), ASTM D412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e45 Shore A, ASTM C661\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e100% modulus\u003c\/th\u003e\n\u003ctd\u003e1.42 MPa (approximately 206 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e150%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e14.8 lb\/gal (approximately 1.77 g\/cm³) in the TDS; SDS reports 15.01 lb\/gal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eService temperature\u003c\/th\u003e\n\u003ctd\u003e-50°F to 220°F (-46°C to 104°C); intermittent exposure up to 270°F (132°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuggested application temperature\u003c\/th\u003e\n\u003ctd\u003e32°F to 150°F (0°C to 66°C); colder conditions slow cure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC content\u003c\/th\u003e\n\u003ctd\u003e9.55 g\/L, ASTM D2369\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeathering test\u003c\/th\u003e\n\u003ctd\u003ePass, ASTM G154, 10,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDocumented shelf life\u003c\/th\u003e\n\u003ctd\u003e12 months from shipment for cartridges stored at 70°F (21°C) and 50% RH; high temperature and humidity can significantly shorten shelf life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable sizes\u003c\/th\u003e\n\u003ctd\u003e10 oz tube and 20 oz tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePerformance values are typical and should not be used as guaranteed design specifications. Test adhesion and strength on the actual substrate and in the intended environment after allowing seven days for maximum strength development.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eDirections for Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMake sure surfaces are clean and free of oils, dust, and other contaminants. Although ASI 5900 can cure in the presence of moisture, cleaning is still required.\u003c\/li\u003e\n\u003cli\u003eWhere compatible with the substrate, clean with 100% isopropyl alcohol or acetone. Do not use petroleum-based solvents.\u003c\/li\u003e\n\u003cli\u003eCut the nozzle to the desired bead size, load the package into the appropriate dispensing gun, and apply directly. No mixing or additives are required.\u003c\/li\u003e\n\u003cli\u003eJoin and position the materials while the adhesive is workable. Apply enough material for continuous contact and proper joint coverage.\u003c\/li\u003e\n\u003cli\u003eTool the bead before skin formation, typically within 10 minutes at 70°F (21°C) and 50% RH.\u003c\/li\u003e\n\u003cli\u003eAllow the bond to cure. Higher temperature and humidity accelerate cure; cold and dry conditions slow it. Allow seven days before evaluating maximum adhesion or strength.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWet adhesive can be cleaned with ASI 0240 Adhesive Remover \u0026amp; Cleaner. Cured material generally requires scraping or abrasion. Test all substrates before production use. Olefins such as polyethylene, polypropylene, and TPO require testing, and prolonged underwater submersion can reduce adhesion on some substrates.\u003c\/p\u003e\n\u003ch2\u003eStorage and Handling\u003c\/h2\u003e\n\u003cp\u003eKeep the package tightly closed in a cool, dry, well-ventilated place. For cartridges, the TDS lists a 12-month shelf life from shipment when stored at 70°F (21°C) and 50% RH. Avoid elevated temperature and humidity. Wear suitable gloves and safety glasses, avoid eye and skin contact, and review the SDS before use. The SDS lists ASI 5900 as not regulated for transport by DOT, IATA, or IMDG.\u003c\/p\u003e","brand":"ASI","offers":[{"title":"Fresh Batch \/ 10oz Tube","offer_id":48958744592638,"sku":"ASI_5900_10OZ","price":9.0,"currency_code":"CAD","in_stock":true},{"title":"Fresh Batch \/ 20oz Tube","offer_id":48958758650110,"sku":"ASI_5900_20OZ","price":15.0,"currency_code":"CAD","in_stock":true},{"title":"Short Shelf Life (1-3 Mths Left) \/ 10oz Tube","offer_id":48958758682878,"sku":"SL_ASI_5900_10OZ","price":8.0,"currency_code":"CAD","in_stock":false},{"title":"Short Shelf Life (1-3 Mths Left) \/ 20oz Tube","offer_id":48958758715646,"sku":"SL_ASI_5900_20OZ","price":13.0,"currency_code":"CAD","in_stock":false},{"title":"Recently Expired \/ 10oz Tube","offer_id":48958758748414,"sku":"XP_ASI_5900_10OZ","price":6.0,"currency_code":"CAD","in_stock":false},{"title":"Recently Expired \/ 20oz Tube","offer_id":48958758781182,"sku":"XP_ASI_5900_20OZ","price":10.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/asi-5900-fast-grab-hybrid-adhesive-natural-white-10oz-cartridge-20oz-sausage.webp?v=1789406309","url":"https:\/\/www.perigeedirect.com\/en-ca\/products\/asi-5900-fast-grab-hybrid-adhesive","provider":"Perigee Direct","version":"1.0","type":"link"}