{"title":"Heartland Adhesives","description":"\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/logo.webp?v=1789661640\" alt=\"Heartland Adhesives\" width=\"550\" height=\"162\" style=\"margin: 10px 0 20px 0;\"\u003e\u003c\/div\u003e\n\u003cp\u003eHeartland Adhesives has been building engineering adhesives since 2006. Perigee Direct carries the core line: anaerobic threadlockers and retaining compounds, cyanoacrylate instant adhesives across viscosity grades, and the primers and accelerators that go with them.\u003c\/p\u003e\n\u003cp\u003eAnaerobics cure in the absence of air between metal parts, which is what makes them work on threads, bearing fits and pipe sealing. Grade is the whole decision. Pick a low strength and the joint backs out under vibration. Pick a high strength on a fastener you intend to remove and you will need heat to get it apart.\u003c\/p\u003e\n\u003cp\u003eCyanoacrylates are a different trade-off. Thin grades wick into tight-fitting joints and set in seconds. Thicker grades fill gaps and give you a few more seconds of working time. On slow substrates like polyethylene and polypropylene, a primer is the difference between a bond and no bond, and an accelerator will pull cure time down when you are working in cold or dry air.\u003c\/p\u003e\n\u003cp\u003eIf you want help matching a grade to the joint, call \u003ca href=\"tel:8173819398\"\u003e(817) 381-9398\u003c\/a\u003e or email \u003ca href=\"mailto:sales@perigeedirect.com\"\u003esales@perigeedirect.com\u003c\/a\u003e.\u003c\/p\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/collections\/logo.webp?v=1789666271","url":"https:\/\/www.perigeedirect.com\/en-ca\/collections\/heartland-adhesives.oembed","provider":"Perigee Direct","version":"1.0","type":"link"}