CS-NRI ESN-202-7IN (previously known as Syntho-Steel) - Steel-Reinforced Epoxy Putty (NSF61 & BS6920 compliant for drinking water contact)

In stock
SKU: CSNRI_ESN-202-7IN
Regular price $41.00 AUD
10 units are available

Product details

  • Type Pipe Repair Wraps
  • Vendor CS-NRI
  • SKU CSNRI_ESN-202-7IN
  • Barcode CSNRI_ESN-202-7IN

CS-NRI ESN-202-7IN (previously known as Syntho-Steel) is a two-part, steel reinforced epoxy putty. It cures in minutes and can repair most anything made of metal, masonry, wood, ceramic, glass and plastics.

ESN-202-7IN (previously known as Syntho-Steel) contains no solvents, is non-toxic and easily prepares for application. Unlike liquid epoxies, ESN-202-7IN will not drip or sag and will set on wet surfaces. NSF61 and BS6920 compliant for use with potable water. When fully cured the material produces a durable, resilient bond resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.

ESN-202-7IN is widely used for pipeline repairs in various industries.

Typical Applications:

  • Repair leaking water pipes
  • Seals leaks in oil and water tanks
  • Plug holes and seals
  • Fill corrosion voids
  • Designed for low pressure leaks

Typical Applications

  • Impact Protection
  • Emergency Repair
  • Corroded Pipes
  • Irregular pipe fittings
  • Force Mains and gravity lines
  • Joint and Tee repair
  • Underwater repair and splash zone

Physical Properties

  • Temp Sustained/Continuous: 250°F (121°C)
  • Temp Spikes/Intermittent: 300°F (149°C)
  • Density: 2.2 lb/gal, 18.5gm/cm3
  • Electrical Resistance: 30,000mega-ohms
  • Solids Content: 100%
  • Chemical Resistance: Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.
  • Length: 7"
  • Weight: 115g

Physical Properties:

  • Density : 15.8 lb/gal (1.9 gm/cm3)
  • Compression Strength : 18,000 psi or 1241 bar
  • Tensile Strength : 6000 psi or 413 bar
  • Modulus of Elasticity : 6x106 psi
  • Shear Strength : 700 psi (48 bar)
  • Hardness (Shore D): 85
  • Maximum Use Temperature : 300 degrees F (149 degrees C)

Electrical Properties :

  • Volume Resistivity : 5X1016 ohm-cm
  • Dielectric Strength : 400 volts/mil @0.125 in

    Working Time

    • 5 Minutes at 75°F (24°C)

    Shelf Life

    • 24 months with recommended storage

    Storage Conditions

    • Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials, food and drink. Storage at temperature between 64°F and 86°F. Keep away from humidity and water. Keep container tightly closed and sealed until ready for use.