{"title":"Mactac","description":"\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/mactac_logo.png?v=1790060222\" alt=\"Mactac\" width=\"250\" height=\"100\" style=\"margin: 0 0 12px 0;\"\u003e\u003c\/div\u003e\n\u003cp\u003ePerigee Direct carries Mactac engineered tapes for mounting work that has to hold without fasteners. The Macbond Ultra 555 foam tapes, IM1763 at 1\/32 inch and IM1863 at 1\/16 inch, grip zero VOC painted drywall and low surface energy plastics where thin acrylic tapes let go. Macmount XT puts high tack rubber on crosslinked PE foam for sign returns and display panels. GS Rivet Tapes carry 20 mil of solvent free rubber behind a dry edge liner and replace rivets and screws outright. Mactac is Morgan Adhesives Company of Stow, Ohio.\u003c\/p\u003e\n\u003cp\u003eSingle rolls ship from Dallas, so you can prove a tape on your own parts before buying a case. Call \u003ca href=\"tel:8173819398\"\u003e(817) 381-9398\u003c\/a\u003e or email \u003ca href=\"mailto:sales@perigeedirect.com\"\u003esales@perigeedirect.com\u003c\/a\u003e to match foam thickness to the gap you are closing.\u003c\/p\u003e","products":[{"product_id":"mactac-im1863-double-coated-pe-foam-tape-1-16-in-1-in-x-108-ft-macbond-ultra-555","title":"Mactac IM1863 Double Coated PE Foam Tape, 1\/16 in, 1 in x 108 ft (Macbond Ultra 555)","description":"\u003cp\u003eMactac IM1863 is an uneven surface foam tape that pairs a 1\/16 inch white PE foam carrier with MP555 Ultra 555 permanent rubber adhesive at 2.6 mils per side. Total caliper is 66.50 mils, double the cushion of the 1\/32 inch IM1763. Thickness is the whole point. A 1\/16 inch foam closes gaps a thin film tape skates across, so it holds on weld beads, extrusion draft, textured wall finishes, and panel edges that are not quite coplanar. At 1 inch by 108 feet on a plastic core it is the smallest roll in the Ultra 555 line, which makes it the easy way to try the adhesive before committing to a wider width.\u003c\/p\u003e\n\u003ch2\u003eWhat an uneven surface foam tape gives you\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1\/16 in white PE foam carrier, 66.50 mil total caliper\u003c\/li\u003e\n\u003cli\u003eMP555 Ultra 555 permanent rubber adhesive, both faces, 2.6 mil per side\u003c\/li\u003e\n\u003cli\u003ePeel adhesion 8 lbs\/in on stainless steel, PSTC-101 Method A\u003c\/li\u003e\n\u003cli\u003eLoop tack 10 lbs\/in, PSTC-16\u003c\/li\u003e\n\u003cli\u003eShear 500 plus hours under a 1 kg load at 72F, PSTC-107\u003c\/li\u003e\n\u003cli\u003eTensile 129 lbs\/in machine direction, 96 lbs\/in cross direction\u003c\/li\u003e\n\u003cli\u003e232 percent elongation machine direction, so it stretches around a radius instead of splitting\u003c\/li\u003e\n\u003cli\u003e78# SCK liner at medium release, peels clean by hand and feeds a rotary die\u003c\/li\u003e\n\u003cli\u003eWater resistant, so restroom and kitchen fixtures hold without a sealant bead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePopular Uses\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSignage and display mounting\u003c\/li\u003e\n\u003cli\u003eAppliance trim and badge attachment\u003c\/li\u003e\n\u003cli\u003eSoap and sanitizer dispenser mounting\u003c\/li\u003e\n\u003cli\u003eMirror mounting\u003c\/li\u003e\n\u003cli\u003eBonding decorative paneling to framing\u003c\/li\u003e\n\u003cli\u003eVibration damping on HVAC panels, equipment covers, and ductwork\u003c\/li\u003e\n\u003cli\u003eDie cut pads and gaskets, since the carrier holds its shape through a rotary die\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePhysical Properties\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: IM1863-78\u003c\/li\u003e\n\u003cli\u003eRoll size: 1 in x 108 ft on a plastic core\u003c\/li\u003e\n\u003cli\u003eApplication temperature: 50F minimum\u003c\/li\u003e\n\u003cli\u003eService temperature: -40F to 190F\u003c\/li\u003e\n\u003cli\u003eColor: white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eChoosing an Uneven Surface Foam Tape Thickness\u003c\/h2\u003e\n\u003cp\u003eSpecify this 1\/16 inch carrier when the substrate is out of plane by more than a few thousandths of an inch. Drop to the 1\/32 inch IM1763 for flat drywall and sheet metal, where the extra bulk buys nothing. The same Ultra 555 adhesive is also coated on a 0.5 mil PET film when the joint needs no foam at all.\u003c\/p\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eWipe both faces clear of dust, oil, and release agent and let them dry. Peel the liner back a few inches, set the part, then press the full length with a roller so the adhesive wets into the texture. Apply at 50F or warmer so the adhesive flows. Both faces are permanent, so set the position before the liner comes all the way off.\u003c\/p\u003e\n\u003ch2\u003eQuestions Before You Order\u003c\/h2\u003e\n\u003cp\u003eCall \u003ca href=\"tel:8173819398\"\u003e(817) 381-9398\u003c\/a\u003e or email \u003ca href=\"mailto:sales@perigeedirect.com\"\u003esales@perigeedirect.com\u003c\/a\u003e and we will help match the tape to your substrate pair. Single rolls ship from our Dallas warehouse, so you can prove it on your own parts before buying a case.\u003c\/p\u003e\n\u003cp\u003eFOR INDUSTRIAL USE ONLY. Refer to the SDS prior to use.\u003c\/p\u003e","brand":"Mactac","offers":[{"title":"1 in x 108 ft","offer_id":49027794993406,"sku":"MACTAC_IM1863_1IN_108FT","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/MT_IM1763-78-Double-Coated-Foam-Tape.png?v=1790097931"},{"product_id":"mactac-im1763-double-coated-pe-foam-tape-1-32-in-1-in-x-216-ft-macbond-ultra-555","title":"Mactac IM1763 Double Coated PE Foam Tape, 1\/32 in, 1 in x 216 ft (Macbond Ultra 555)","description":"\u003cp\u003eMactac IM1763 is a no drill mounting tape built on a 1\/32 inch white PE foam carrier with MP555 permanent rubber adhesive coated 2.6 mils onto each face. Total caliper runs 35.25 mils, and the roll ships self wound, permanent to permanent, 1 inch wide by 216 feet on a 3 inch plastic core. What wins ADA and office signage work is adhesion to zero VOC painted drywall, a low energy surface that walks most thin acrylic tapes off the wall inside a season. On most of these installs it replaces mechanical fasteners outright, so there are no drilled holes, no anchors, and no patching afterward. It cross references to 3M 4032.\u003c\/p\u003e\n\u003ch2\u003eWhy a no drill mounting tape holds on painted drywall\u003c\/h2\u003e\n\u003cp\u003eMP555 is a rubber pressure sensitive adhesive tuned for high tack and peel while keeping the cohesive strength that rubber systems usually trade away. Under a 1 kg static load it runs past 500 hours before shear failure. The 1\/32 inch foam compresses to bridge orange peel texture, joint compound ridges, and the small mismatch between two dissimilar substrates, and it stays compressed under load rather than springing the edges open. Ultra 555 is water resistant, which is why fixture mounting in restrooms and kitchens does not need a separate sealant bead.\u003c\/p\u003e\n\u003ch2\u003ePopular Uses\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAcoustic panel mounting, where the foam also damps panel buzz and low frequency noise\u003c\/li\u003e\n\u003cli\u003eADA signage, interior signage, and nameplates\u003c\/li\u003e\n\u003cli\u003eSoap and sanitizer dispensers, mirrors, and fixtures\u003c\/li\u003e\n\u003cli\u003eShiplap, architectural detailing, and decorative paneling\u003c\/li\u003e\n\u003cli\u003eWire clips and surface mounted electrical channel\u003c\/li\u003e\n\u003cli\u003ePoint of purchase assembly, where a rigid faceplate has to sit flat against a cupped substrate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePhysical Properties\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: IM1763-78\u003c\/li\u003e\n\u003cli\u003eCarrier: 1\/32 in white PE foam\u003c\/li\u003e\n\u003cli\u003eAdhesive: MP555 Ultra 555 permanent rubber, both sides, 2.6 mil per side\u003c\/li\u003e\n\u003cli\u003eCaliper, carrier and adhesive: 35.25 mil\u003c\/li\u003e\n\u003cli\u003eLiner: 78# SCK, medium release\u003c\/li\u003e\n\u003cli\u003eRoll size: 1 in x 216 ft, 3 in plastic core\u003c\/li\u003e\n\u003cli\u003eShear strength: 500 plus hours to failure\u003c\/li\u003e\n\u003cli\u003eApplication temperature: 50F minimum\u003c\/li\u003e\n\u003cli\u003eService temperature: -40F to 190F\u003c\/li\u003e\n\u003cli\u003eCross reference: 3M 4032\u003c\/li\u003e\n\u003cli\u003eColor: white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNo Drill Mounting Tape Surface Preparation\u003c\/h2\u003e\n\u003cp\u003eClean both surfaces of dust, oil, and release agent and let them dry. Peel the liner back a few inches, position the part, then roll the full length down firmly so the adhesive wets into the surface texture. Apply at 50F or warmer. Pick the thicker 1\/16 inch IM1863 instead when the substrate is out of plane by more than a few thousandths of an inch.\u003c\/p\u003e\n\u003ch2\u003eQuestions Before You Order\u003c\/h2\u003e\n\u003cp\u003eCall \u003ca href=\"tel:8173819398\"\u003e(817) 381-9398\u003c\/a\u003e or email \u003ca href=\"mailto:sales@perigeedirect.com\"\u003esales@perigeedirect.com\u003c\/a\u003e and we will help match the tape to your substrate pair. Single rolls ship from our Dallas warehouse, so you can prove it on your own parts before buying a case.\u003c\/p\u003e\n\u003cp\u003eFOR INDUSTRIAL USE ONLY. Refer to the SDS prior to use.\u003c\/p\u003e","brand":"Mactac","offers":[{"title":"1 in x 216 ft","offer_id":49027801809150,"sku":"MACTAC_IM1763_1IN_216FT","price":34.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/Mactac-IM1763-Double-Sided-Tape.png?v=1790183978"},{"product_id":"mactac-im1900xt-double-coated-foam-tape-3-4-in-and-1-in-x-216-ft-macmount-xt","title":"Mactac IM1900XT Double Coated Foam Tape, 3\/4 in and 1 in x 216 ft (Macmount XT)","description":"\u003cp\u003eMactac IM1900XT is a sign mounting tape built on a 1\/32 inch white crosslinked PE foam carrier with high tack XT rubber adhesive at 1.8 mils per side, 34.85 mils of total caliper, and an 83# white SCK liner. Three quarter inch is the width sign shops and display houses cut most, because it keeps tape off the sight line on a shallow return while still carrying real load. Move up to the 1 inch width when the panel gets heavier. Both widths run 216 feet to a roll.\u003c\/p\u003e\n\u003ch2\u003eWhere this sign mounting tape fits\u003c\/h2\u003e\n\u003cp\u003eIt runs down the return of a channel letter or a fabricated sign face, sets acrylic and styrene panels onto point of purchase fixtures, holds trim and moldings on displays, and mounts light nameplates, badges, and hardware where a full inch of tape would show past the part. Wire clip and cable management mounting works the same way. The foam carrier bridges the gap left by a weld bead, an extrusion draft angle, or a heavy powder coat run, and it damps the buzz a thin rigid panel picks up near a fan or compressor.\u003c\/p\u003e\n\u003ch2\u003ePopular Uses\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChannel letter and sign face returns\u003c\/li\u003e\n\u003cli\u003eAcrylic and styrene panels onto point of purchase fixtures\u003c\/li\u003e\n\u003cli\u003eTrim and moldings on displays\u003c\/li\u003e\n\u003cli\u003eNameplates, badges, and light hardware\u003c\/li\u003e\n\u003cli\u003eWire clips and cable management\u003c\/li\u003e\n\u003cli\u003eDie cut pads and strips, since the 83# liner feeds a rotary die without breaking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSign Mounting Tape Performance\u003c\/h2\u003e\n\u003cp\u003eThe XT adhesive is a high tack rubber system on both faces, so parts grab on contact and the joint reaches strength without a cure window. Under static load it passes 500 hours before shear failure. Adhesion holds on low surface energy plastics such as polyethylene and polypropylene, on primed wood and paper, on painted and bare metal, and on firm foam, rubber, and flexible magnet. Both faces are permanent, so set the position before the liner comes all the way off. Pulling a part back after full contact tears the foam rather than releasing the bond.\u003c\/p\u003e\n\u003ch2\u003ePhysical Properties\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: IM1900XT\u003c\/li\u003e\n\u003cli\u003eCarrier: 1\/32 in white crosslinked PE foam\u003c\/li\u003e\n\u003cli\u003eAdhesive: XT high tack rubber, both sides, 1.8 mil per side\u003c\/li\u003e\n\u003cli\u003eCaliper, carrier and adhesive: 34.85 mil\u003c\/li\u003e\n\u003cli\u003eLiner: 83# white SCK\u003c\/li\u003e\n\u003cli\u003eRoll sizes: 3\/4 in x 216 ft and 1 in x 216 ft\u003c\/li\u003e\n\u003cli\u003eShear strength: 500 plus hours to failure\u003c\/li\u003e\n\u003cli\u003eApplication temperature: 50F minimum\u003c\/li\u003e\n\u003cli\u003eService temperature: 0F to 180F\u003c\/li\u003e\n\u003cli\u003eColor: white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eSurface prep decides the bond. Wipe both faces clear of dust, oil, and release agent, let them dry, peel the liner back a few inches, set the part, then press the full length with a roller so the adhesive wets into the texture.\u003c\/p\u003e\n\u003ch2\u003eQuestions Before You Order\u003c\/h2\u003e\n\u003cp\u003eCall \u003ca href=\"tel:8173819398\"\u003e(817) 381-9398\u003c\/a\u003e or email \u003ca href=\"mailto:sales@perigeedirect.com\"\u003esales@perigeedirect.com\u003c\/a\u003e and we will help match the tape to your substrate pair. Single rolls ship from our Dallas warehouse, so you can prove it on your own parts before buying a case.\u003c\/p\u003e\n\u003cp\u003eFOR INDUSTRIAL USE ONLY. Refer to the SDS prior to use.\u003c\/p\u003e","brand":"Mactac","offers":[{"title":"3\/4 in x 216 ft","offer_id":49027806200062,"sku":"MACTAC_IM1900XT_0.75IN_216FT","price":18.3,"currency_code":"USD","in_stock":true},{"title":"1 in x 216 ft","offer_id":49027806232830,"sku":"MACTAC_IM1900XT_1IN_216FT","price":21.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/Mactac-IM1900XT-scaled.png?v=1790097938"},{"product_id":"mactac-gs-rivet-tape-20-mil-rubber-transfer-adhesive-1-in-and-2-in-x-200-ft-gs1001-gs1013","title":"Mactac GS Rivet Tape, 20 mil Rubber Transfer Adhesive, 1 in and 2 in x 200 ft (GS1001, GS1013)","description":"\u003cp\u003eThe Mactac GS series is a rivet replacement tape that does the job a rivet or a screw does. Twenty mils of solvent free, high strength rubber pressure sensitive adhesive is coated onto a release liner, and that adhesive carries the load across a sign face, a panel, or a trim run without a hole drilled anywhere. The bond forms on contact under hand pressure. No cure time, no mixing, no fastener head to countersink or seal. GS1001 carries a 1.00 inch adhesive lane and GS1013 carries 2.00 inches, both 20 mil and both 200 feet to a roll. The adhesive is identical, so width is the only decision.\u003c\/p\u003e\n\u003ch2\u003eThe dry edge is what makes a rivet replacement tape workable by hand\u003c\/h2\u003e\n\u003cp\u003eThe adhesive lane is narrower than the liner on purpose. GS1001 puts a 1.00 inch lane on a 1.50 inch liner, which leaves a quarter inch of ungummed liner running past the adhesive on each side. That clean margin is something to grip. The roll does not stick to itself as it pays out, the adhesive stays off gloves during placement, and a long run can be steered with two hands on the liner instead of one hand chasing a flush edge.\u003c\/p\u003e\n\u003ch2\u003eWhy 20 mil matters\u003c\/h2\u003e\n\u003cp\u003eA 20 mil coat weight is heavy for a transfer adhesive, and the thickness is what lets it wet out surfaces thinner tapes skate across. Rough concrete, textured powder coat, routed plastic, sanded MDF. It also grips low surface energy plastics such as HDPE, polypropylene, and polyethylene, where acrylic foam tapes often need a primer before they will start. Because there is no film or foam carrier in the middle, the full 20 mil is adhesive doing bonding work, which is why it conforms to an irregular surface better than a double coated film.\u003c\/p\u003e\n\u003ch2\u003ePopular Uses\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSign faces to frames, plaques, nameplates, ADA signage, channel letters, A-frame panels\u003c\/li\u003e\n\u003cli\u003ePanel and cladding attachment, trim, architectural panels, office partitions\u003c\/li\u003e\n\u003cli\u003eGasket and seal placement, temporary clamping, staging during assembly\u003c\/li\u003e\n\u003cli\u003eRecreational vehicle interior wall and ceiling panels, trim, insulation, weather stripping\u003c\/li\u003e\n\u003cli\u003eAppliance badge and trim attachment, sound damping pads, panel bonding\u003c\/li\u003e\n\u003cli\u003eRetail fixtures, temporary displays, craft and point of purchase assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRivet Replacement Tape Performance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eQuick tack 20 plus lbs per square inch, so parts hold the moment they are pressed together\u003c\/li\u003e\n\u003cli\u003ePeel adhesion 22 plus lbs per inch of width once the bond has wet out\u003c\/li\u003e\n\u003cli\u003eShear resistance 300 plus hours to fail, which is what lets it stand in for a fastener under sustained load\u003c\/li\u003e\n\u003cli\u003eVibration damping and moisture resistance across the full bond line, rather than point loading at fastener holes\u003c\/li\u003e\n\u003cli\u003eWorks as a third hand, holding parts in alignment while fasteners go in or a structural adhesive cures\u003c\/li\u003e\n\u003cli\u003eDoubles as a gap filler between panel and substructure where the fit is not perfectly flat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePhysical Properties\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdhesive: GS Ultra High Tack rubber, solvent free, unsupported transfer adhesive\u003c\/li\u003e\n\u003cli\u003eAdhesive thickness: 20 mil\u003c\/li\u003e\n\u003cli\u003eGS1001: 1.00 in adhesive on a 1.50 in liner, 200 ft\u003c\/li\u003e\n\u003cli\u003eGS1013: 2.00 in adhesive on a 3.00 in liner, 200 ft\u003c\/li\u003e\n\u003cli\u003eCore: 3 in, self wound\u003c\/li\u003e\n\u003cli\u003eApplication temperature: 50F and above\u003c\/li\u003e\n\u003cli\u003eService temperature: 0F to 180F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatible Substrates\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLow surface energy plastics: HDPE, LDPE, polypropylene, polyethylene\u003c\/li\u003e\n\u003cli\u003eUHMW and corrugated plastics\u003c\/li\u003e\n\u003cli\u003eAluminum, steel, and powder coated metal\u003c\/li\u003e\n\u003cli\u003eWood, MDF, OSB, and plywood\u003c\/li\u003e\n\u003cli\u003eConcrete, masonry, brick, and cement board\u003c\/li\u003e\n\u003cli\u003eGlass and fiberglass\u003c\/li\u003e\n\u003cli\u003eCorrugated board and paperboard\u003c\/li\u003e\n\u003cli\u003eComposites and aluminum composite material panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRemoving It Without Residue\u003c\/h2\u003e\n\u003cp\u003ePeel slowly from a corner at a low angle, pulling back across the tape rather than straight away from the surface. Pulling fast or at 90 degrees is what leaves adhesive behind. Clean release depends on the substrate and on how long the tape has been in place. Not recommended for wallpaper or freshly painted walls. Test the actual surface before a production run.\u003c\/p\u003e\n\u003ch2\u003eLimits Worth Knowing\u003c\/h2\u003e\n\u003cp\u003eSurfaces have to be clean, dry, and free of oil, grease, silicone, and release agents, because contamination is the usual cause of a failed bond. The adhesive is rubber based, so it is not rated for chemical, solvent, or plasticizer exposure, and prolonged direct sunlight will age it on long term exterior work. An acrylic chemistry is the better answer for years of full sun. Weight, orientation, and service conditions decide how much bond area a part needs, so size the bond rather than matching a fastener count.\u003c\/p\u003e\n\u003ch2\u003eQuestions Before You Order\u003c\/h2\u003e\n\u003cp\u003eCall \u003ca href=\"tel:8173819398\"\u003e(817) 381-9398\u003c\/a\u003e or email \u003ca href=\"mailto:sales@perigeedirect.com\"\u003esales@perigeedirect.com\u003c\/a\u003e and we will help match the tape to your substrate pair. Single rolls ship from our Dallas warehouse, so you can prove it on your own parts before buying a case.\u003c\/p\u003e\n\u003cp\u003eFOR INDUSTRIAL USE ONLY. Refer to the SDS prior to use.\u003c\/p\u003e","brand":"Mactac","offers":[{"title":"GS1001, 1 in adhesive x 200 ft","offer_id":49027816882430,"sku":"MACTAC_GS1001_1IN_200FT","price":39.18,"currency_code":"USD","in_stock":true},{"title":"GS1013, 2 in adhesive x 200 ft","offer_id":49027816915198,"sku":"MACTAC_GS1013_2IN_200FT","price":106.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/files\/Mactac-GS1-Double-Sided-Tape.png?v=1790183971"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1212\/5762\/collections\/mactac_logo.png?v=1790098115","url":"https:\/\/www.perigeedirect.com\/collections\/mactac.oembed","provider":"Perigee Direct","version":"1.0","type":"link"}